Bruno CURB-SIDER VSL-6000G Operator's Manual page 12

STEP 6.3
• Unhook the C-arm/pick-up claw from the
docking device.
• Depress and hold the UP button on the control
pendant to raise the C-arm/pick-up claw to the
belt guide.
NOTE: Stop lift operation before the white stitch-
ing on the lift belt enters the belt guide slot
(see bottom left).
• Depress and hold the IN button on the control
pendant to swing the lift back into the vehicle.
• Release the IN button when the lift is in the
proper location.
• Place the control pendant in a secure location
inside the vehicle.
Is the cord completely inside the vehicle?
• Close the vehicle door.
VSL-6000G/6900G Operator's 04-07-2022
Unload the mobility device onto a
level surface.
If unloading onto a sidewalk with a
curb or onto a raised surface, make
sure all wheels of the mobility device
come to rest on the same plane.
12
stop before
white stitching
reaches belt guide
Bruno Independent Living Aids