Table of Contents
Advertisement
ADVANCED OPERATIONS
Dialing from Memory
1. Press the desired LINE key to get a
dial tone.
2. Press MEM/PROG. The LCD
displays
SPEED DIAL LOCATION _ _.
3. Enter the 2-digit Memory location
(01-20).
Alternate Memory Dialing Method
1. With the Handset OFF, Press MEM/
PROG. The LCD displays SPEED
DIAL LOCATION _ _.
2. Enter the 2-digit Memory location
(01-20).
3. Press the desired LINE key. After a
2 second delay to allow for a dial
tone, the phone number displayed on
the LCD will be generated.
NOTE:
Any digits displayed on the LCD prior
to entering Memory Dialing mode will
be appended to the front of the
contents of your selected memory
location. For example, if 1800 was
entered (with the Handset OFF), and
the phone number in the memory
location you selected was 5551212,
the number that would be dialed upon
pressing a LINE key becomes 1-800-
555-1212.
CHANGING STORED NUMBERS
To change or replace a number stored
in a memory location, simply follow the
steps outlined in Programming Phone
Numbers into Memory . The new
phone number will be stored in any
location you designate. Any phone
number previously stored in that location
will be deleted.
VT2910C EN MANU
DELETING STORED NUMBERS
You can delete individual phone
numbers stored in memory, or all stored
numbers at one time.
To Delete a single phone number
stored in Memory:
With the Handset OFF, press the MEM/
PROG key, and then access the desired
memory location by entering the 2-digit
location number (01-20), or by scrolling
through the directory using the * and #
keys.
Once you have found the desired
memory location, press and hold the
INT.COM/DEL key until the LCD dis-
plays LOCATION XX DELETED.
To delete all phone numbers
stored in Memory:
With the Handset OFF, press the MEM/
PROG key, and then access any
memory location by entering a 2-digit
location number (01-20), or by scrolling
through the directory using the * and #
keys.
Once a Memory location is displayed in
the LCD, press and hold the CONF/
CLEAR key until the LCD changes to
DELETE ALL? DEL TO ALLOW.
To confirm, press INT.COM/DEL. The
LCD will display DELETING ALL
LOCATIONS.To cancel mass deletion
of stored phone numbers, press OFF
instead.
27
27
12/16/99, 6:17 AM
Advertisement
Table of Contents
