Table of Contents
Advertisement
QUALITROL AKM345 GEN3 OTIWTI
40-08847-00-Rev001
5.2.2
Cover Removal
To remove the front cover, perform the following instructions:
Step 1) Loosen two of the top M5 captive screws. DO NOT remove screws from hinge.
Step 2) While holding the lid, loosen two of the bottom M5 captive screws to release the lid from the
enclosure base. Again, DO NOT remove screws from the lid.
Step 3) Lid assembly can now be fully removed.
www.qualitrolcorp.com
TM
Instruction Manual
AKM345 GEN3 with Cover Removed
Page 18 of 34
Advertisement
Table of Contents
