Table of Contents
Advertisement
QUICK REFERENCE GUIDE
FROM THE BASE
•
Press SPEAKERPHONE, then
wait for dial tone. Dial the desired
phone number.
•
To
end
your
SPEAKERPHONE again.
ANSWERING CALLS
• When there is an incoming phone
call, pressing OFF key on the
handset can stop the ringing.You
can also answer the call simply by
pressing any key except OFF,
VOLUME, INT.COM keys and 3
PPU keys.
FROM THE HANDSET:
•
Press any key except OFF,
Volume, INT.COM keys and 3
PPU keys.
•
Press OFF to end your call.
FROM THE BASE:
•
Press SPEAKERPHONE. To end
your call, press SPEAKERPHONE
again.
TEMPORARY TONE
•
If your local telephone service
requires rotary (PULSE) dialing,
you can temporarily switch to
TONE dialing for such purposes
as accessing answering ma-
chines, bank-by-phone services,
and using calling cards.
•
To switch from rotary to tone
dialing during a call, press the
call,
press
1 5
TONE key. When you end your
*
call by pressing OFF or returning
the handset to the base unit, the
phone will return to the rotary
(PULSE) mode.
VOLUME CONTROL
FROM THE HANDSET
•
The phone must be ON.
•
Located on the side of the Hand-
set, press the VOLUME UP or
VOLUME DOWN keys to raise or
lower the earpiece volume. There
are 8 volume levels.
FROM THE BASE
•
The Base Unit has its own volume
control. The VOL Up and Down
keys are located directly above
the SPEAKERPHONE key.
RINGER CONTROL
FROM THE HANDSET
With the Handset in the idle (off)
mode:
•
Press MENU
Advertisement
Table of Contents
