Table of Contents
Advertisement
HEADSET OPERATION
Your CB 1733 is equipped with a
2.5mm Headset Jack for use with an
optional accessory Headset for hands-
free operation.
If you choose to use the Headset
option, you must obtain an optional
accessory Headset, which is compat-
ible with the CB 1733.
To purchase a Headset, call
800-877-1624.
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on
the CB 1733 Handset. Connect the
plug on the Headset cord to the jack on
the cordless Handset. The plug should
fit securely. Do not force the connec-
tion.
OPERATION
NOTE:
Whenever a compatible
Headset is connected to the cordless
Handset, the microphone on the Hand-
set will be muted. This is done to limit
the effect of background noise.
The following operational charac-
teristics apply to compatible Headsets.
The same may also apply to other
headsets, but Cincinnati Bell assumes
no responsibility for their performance.
BELT CLIP
The CB 1733 is also equipped with
a detachable belt clip. Align the pins on
the inside edge of the clip with the
notches on the sides of the CB 1733
Handset. The belt clip should snap
securely into place. Do not force the
connection.
3 4
Advertisement
Table of Contents
