Table of Contents
Advertisement
ADDITIONAL OPERATING TIPS
OUT OF RANGE INDICATION
When the handset is in Phone On
mode and moved to a point where it
and the Base Unit can no longer com-
municate, the Handset will beep twice
and display OUT OF RANGE:
and attempt to re-link with the Base. If
this occurs while you're on a call, move
closer to the Base Unit.
If the Handset does not re-establish
contact with the Base within 30 sec-
onds of losing contact, the Handset will
automatically drop the call and turn off.
If you walk out of range while the
Handset is not in use, the Handset will
beep twice and display OUT OF
RANGE until the user press any key.
NOTE:
If the Base Unit is without
power, the Handset will behave as if
it is out of range. Therefore, if the
handset beeps, the display OUT OF
RANGE occurs, and moving closer
to the Base does not help, check the
Base Unit to make sure it has power.
MESSAGE WAITING
INDICATOR (for use with
Voicemail)
Your CB 1733 is capable of detect-
ing a visual Message Waiting signal,
generated by many phone service pro-
viders. If you subscribe to Voicemail
service from your local telephone com-
pany, and a visual message waiting
signal is provided, the CB 1733 will
display
on the right side of the
Handset LCD to alert you to new,
unplayed messages.
On the Base, the red MESSAGE LED
will light up to alert you to new unplayed
messages.
Once you have reviewed all of your
new voicemail messages and hung up
the phone, the CB 1733 will usually
turn off the Handset and Base indicators
automatically. Note that there is a delay
for the indicators to turn off, as the CB
1733 is waiting for an update signal
from the telephone network.
After all new voicemail messages
have been reviewed, if the MESSAGE
WAITING indicator (icon or Base LED)
remains on, you can manually clear
the indications as follows:
•
Press MENU, scroll to 9. Del MSG
Icon. Press ENTER
•
Press YES to delete the icon and
Base LED.
3 5
Advertisement
Table of Contents
