Advertisement
Installation
Instalación / Installation /
Installation / Installazione
Note: When the unit is connected to the USB-C port on your
computer and to a network via Cat5e/6 cabling, a network
connection will be automatically established. If no connection
is made, you can manually establish one by going to your
computer's network settings page. For example, on a Mac, you
would navigate to the Network section found in System
Preferences, click the 'Assist Me' button to get to the Network
Setup Assistant, then follow the prompts to establish a
connection.
1. Connect the unit's USB-C plug to the USB-C port on
your laptop, tablet or other device.
2. Connect up to 3 USB devices to the USB-A hub ports on
the unit.
3. Connect the unit's RJ45 port to a network using a UTP
cable (such as N201-Series Cat6 cables).
4. Charge and power your host device by connecting its AC
wall charger to the adapter's USB-C PD port
(U460-003-3AG-C and U460-003-3AGB-C only).
Note: USB-C PD port does not support Quick Charge (QC).
2
Advertisement
