Telephone Directory
Your phone can store 10 (including the nine speed dial entries) numbers with names (up to 15 characters
for the name and 24 digits for the number) in each handset.
• Press REDIAL/
When memory is full the screen displays MEMORY FULL, an error tone sounds, and you will not be
PAUSE to display
able to store a new number until you delete a stored number.
the last number
dialed from this
Store a Number/Name in the Directory
phone to store it in
1. Press PROG. The screen displays DIRECTORY.
speed dial memory.
2. Press SELECT. The screen displays ENTER NAME.
3. Using the chart on page 14, enter up to 15 characters for the name you're storing with the number.
Use
4. When you finish entering the name, press SELECT. The screen displays ENTER NUMBER.
5. Enter the telephone number. Use
Press REDIAL/PAUSE to store a pause in the dialing sequence.
-OR-
Press REDIAL/PAUSE if you wish to display and then store the last number dialed.
6. Press SELECT. The screen displays DISTINCT RING? and the current setting.
7. Press
to calls from this number by changing to a distinctive ringing pattern after the first ring.
Choose N for a normal ringing pattern.
8. Press SELECT to confirm your selection. If you chose Y, a D will be displayed with the directory
entry.
16
BASIC OPERATION
to backspace and make corrections; use
to backspace and make corrections.
or
to change the setting. Choose Y (for yes) if you wish the phone to alert you
www.vtechphones.com
or
to advance and add a space.