Exterior
Exterior Shower
Classic units are equipped with a stainless steel
exterior shower� This shower consists of a shower
hose, shower head, and water valve inside of a
lockable exterior door� Water is supplied by the pump
or city water hookup�
120-Volt Outlet
A 120 volt receptacle is located on the curbside of the
travel trailer and is labeled for your convenience� The
trailer must be plugged into a shoreline power supply
for the outlet to operate�
SmartPlug Cable/Satellite and Ethernet Inlet
Connect any external cable TV provider's coax or
portable satellite antenna coax and ethernet internet
cable to the SmartPlug Cable/Satellite and Ethernet
Inlet (located on the roadside exterior near the
Smartplug power inlet)�
6-6
Shoreline Power Inlet and Cordset
SmartPlug Inlet
Your Airstream is equipped with a SmartPlug
power inlet located on the roadside exterior� Prior
to establishing a connection, review the SmartPlug
Cordset instructions that follow�
Features of the SmartPlug include:
• Eliminates Overheating - Increased pin & clip surface
area improves conductivity during high demand�
• Ease of Use - The unique plug body shape and
push-in design ensure a proper connection�
• Multi-Point Locking System - Side clips lock the plug
securely into the inlet, eliminating stress on the pins�
• Weatherproof Seals - Multi-fin silicone gaskets
installed in the inlet cover and interior of the plug
body eliminate moisture penetration�
SmartPlug Cordset
Before connecting power to your Airstream, plug the
cordset (power cord) into the power pedestal and
check the cordset's safe/unsafe LED indicator lights�
If the red LED illuminates, do not plug the cordset into
the SmartPlug inlet on your Airstream�
The cordset has a Reverse Polarity Indicator System
with two LED indicator lights, one blue and one red�
Reverse polarity occurs when connecting a cordset to
a power pedestal that has the positive and negative
leads reversed internally� A reverse polarity condition
is unsafe, and it can damage an Airstream's electrical
components�
Safe/Unsafe LED Signals:
•
Blue ON, Red OFF - Normal Power, Safe
•
Blue ON, Red ON - L1 and neutral are swapped in
a reverse polarity condition, Unsafe
•
Blue OFF, Red ON - L1 and ground are swapped in
a dangerous reverse polarity condition, Unsafe
•
Blue OFF, Red OFF - No Power
2024 Classic