Table of Contents
Advertisement
2.4 ASSEMBLY AND DISASSEMBLY OF [7]MONITOR ASSEMBLY (CABINET PARTS)
2.4.1 Disassembly of MONITOR ASSEMBLY
NOTE :
Be careful not to soil or scratch the monitor screen through the
disassembly/assembly work.
(1) While removing the three screws 1 to 3 in numerical order
and disengaging the two hooks (L7a and L7b) in alphabet-
ical order, remove the MONITOR COVER ASSEMBLY.
NOTE 7a :
After removing the MONITOR COVER ASSEMBLY, be
careful not to damage the FPC and the connector be-
cause the MONI. HINGE ASSEMBLY moves very easily.
(2) Unlock the connector 7a and then remove the FPC while
lifting the MONI. HINGE ASSEMBLY upwards to remove it
together with the FPC.
NOTE 7b :
When removing the FPC, unlock the connector first and
then lift the MONI. HINGE ASSEMBLY upwards.
Accordingly, the FPC is removed together with the
MONI.HINGE ASSEMBLY.
(3) Unsolder the two soldered parts (SD7).
NOTE 7c :
When removing the MONITOR BOARD ASSEMBLY and
the BACKLIGHT together, it is not necessary to unsolder
the two soldered parts (SD7).
NOTE 7d :
It depends on the inch size of the monitor assembly
whether the backlight is supplied as an assembly or as
separated parts.
In replacing the backlight assembly, see the Parts List.
(4) Unlock the connector 7b, and disconnect the FPC from the
connector 7b.
(5) Disconnect the FPC from MONITOR CASE ASSEMBLY.
(6) Remove the screw (4), and remove the MONITOR BOARD
ASSEMBLY while lifting the side of MONITOR BOARD AS-
SEMBLY which has been attached with screw (4) upwards.
(7) Remove the BACKLIGHT and DIFF SHEET in this order.
(8) Remove the LCD FRAME&LCD MODULE while disengag-
ing L7e and L7f at the both sides of MONITOR CASE AS-
SEMBLY.
(9) Remove the S.CASE.
1-12 (No.86712)
L7a
MONITOR COVER
ASSEMBLY
<NOTE 7b>
CN7a
<NOTE 7c>
4
(S7a)
MONITOR BOARD
ASSEMBLY
C1
E1
D1
E1
B1
C1
MONI. HINGE
ASSEMBLY
D1
L7f
L7e
L7c
2
3
(S7b)
(S7b)
Fig.2-4-1
L7b
1
(S7a)
F1
<NOTE 7b>
CN7b
B1
A1
SD7
<NOTE 7d>
BACK LIGHT
ASSEMBLY
DIFF SHEET
SHOULD PUT THIS
PART AT RIGHT SIDE .
LCD FRAME &
LCD MODULE
L7d
A1
S.CASE
F1
MONITOR CASE ASSEMBLY
Advertisement
Table of Contents
