Advertisement
8024B
RESISTANCE (£2)
IN FOR QQ
FUNCTION*
The PEAK-HOLD switch and Function switches are push-push
type. Operate these switches by pushing to the RIGHT ® only!
Do not push or pull these switches to the left (out or off) positions.
®Connect the test leads as shown.
®Depress the mA-°C-V-Q-S switch.
@Depress the grey switch beside the range desired (20k is shown
selected.
@insure that all other switches are at the out or OFF positions.
@Make sure that the device being measured contains no elect-
rical energy.
WARNING
TO AVOID ELECTRICAL SHOCK AND/OR INSTRUMENT DAMAGE,
DO NOT CONNECT
THE 8024B TERMINALS TO SOURCES
THAT
EXCEED
THE
FOLLOWING
LIMITS
WHEN
MEASURING
RESISTANCE
OR CONTINUITY:
COMMON:
500V
DC
OR
AC
RMS
WITH
RESPECT
TO
EARTH
GROUND.
V-(Q2-S: 500V DC OR AC RMS WITH RESPECT TO THE COMMON
TERMINAL.
®Connect the test leads across the device being measured.
®Read the measured value on the display.
Figure 2-8. Resistance Operation
Advertisement
