Datalog Retrieval - WatchGas NEO User Manual

NEO
Photo-ionization Detector

6.2 DATALOG RETRIEVAL

1. To download the datalog from the instrument to the PC, select "Get Log". This process
can take several minutes because datalogging is always on and large files can be
created. The datalog files will appear under the "Datalog" tab on the top of the screen.
Below is a sample screen of datalog information listing sample time and instantaneous
reading. A new Single Datalog file is created each time the instrument is turned on or
the configuration is changed. The middle panel shows the file start time and number
of data points.
2. To export data to a csv file readable by Excel or other spreadsheet software, move
the cursor over the right data panel and click the right mouse button, and then select
either the current Single Datalog file or all the stored data (Whole Datalog).
26
WatchGas Suite Configuration Screen