Config Mode Menus - WatchGas NEO User Manual

Upon successfully entering Config Mode, the screen on the
right will be displayed. The Calibration label is shown and its
icon is highlighted. Use the Up key
scroll through the menu until the desired item is reached, and
use the Right key to select it.
To Exit Config Mode and return to normal operation, press the
Left key repeatedly from any of the Config Menu displays.

5.3 CONFIG MODE MENUS

This table summarizes the Config Mode menus and sub-menus. Not all of these menus
will be displayed if the option is not set up using WatchGas Suite software.
Calibration Measurement
Zero Calib Meas. Unit
Span Calib Meas. Gas
Set Cal.Gas
Set Span
Value
Set Span 2
Value
3-Point Cal.
or Mode key
OK
Ent Esc
Alarm Setting Datalog
Alarm Limits Clear Datalog Data & Time
Alarm Mode Interval
Alarm Settings
Comfort Beep
Man-Down
Alarm
OK
Ent Esc
to
Monitor Setup
Display
Pump Speed
Set Pump Stall
Rolling Graph
Real Time Data
Language
Self-Zeroing
Temp. Unit
Operation
Mode
Site ID
User ID
Wireless Exit
Radio On/Off
Factory Reset
13