Advertisement
1.2
Product Package
This package contains the following components:
One Print Server
One Antenna (Only for Wireless Print Server)
One Power Adapter
One Quick Installation Guide
One CD-ROM (Including all the software utilities,
drivers and User's Manual)
1.3
Hardware Installation Procedure
Unpack the print server package and verify that all the items
listed in the previous section are provided.
Connect the print server to the printer you want to share on the
network.
Connect the print server to your network by attached the network
cable to the UTP port of the print server.
Connect the power adapter to the print server. The print server
will perform the Power-On-Self-Test (POST) after it is powered
on. During the POST, the Status LED will be blinking. When the
Status LED is unlighted, the print server is ready.
Note: You must use the power adapter shipped along with the
print server, do NOT use any other power adapter from other
sources.
1.4
Administrator Installation and Setup
2
Advertisement
