DeLonghi FEB2262.B Instructions For Use Manual page 20

Step 1: Descaling
action
2. Press the button (B5) and hold for at least 5 sec-
onds, until the relative Led starts blinking rapidly. The
indicator Led (C5) blinks to confirm that the descaling
programme is in progress. The mild intensity Led lights up
to indicate that step 1 of the descale cycle is in progress;
3. Empty the drip tray (A14) and the grounds container
(A10) and reposition them; empty the water tank com-
pletely (A9) and remove the softener filter (if installed);
4. Pour the descaler into the water tank up to level A (corre-
sponding to a 100 ml pack) marked on the inner surface
of the tank (fig. 42), then add water (1 litre) up to level
B (fig. 43) and reposition the water tank in the machine.
B
A
42
5. Place an empty container of at least 2 litres capacity under the
coffee spouts (A16) and the water spout (D5) (fig. 44).
2l
6. Press the button to start the descaling cycle; the
indicator light blinks to confirm that step 1 is in progress;
7. For 15 minutes or so, the machine alternates automati-
cally between pausing and releasing liquid from the hot
water spout and the coffee spout.
When the first step of the descaling cycle has been completed,
the low water level indicator (C2) will light up.
8. Empty the container used to collect the descaler solution. Re-
9. Press the
B
A
10. The machine will proceed automatically with rinsing of
When the second step of the descaling cycle has been complet-
ed, the low water level indicator (C2) will light up.
43
11. Empty the container used to collect the water from the
12. Press the
13. When the Led relative to the pre-ground function lights
44
14. The indicator of the grounds container (C4)lights up:
20
Step 2: First rinse
move and empty the water tank, rinse under running water,
then fill with fresh drinking water up to the MAX level (fig. 45)
and return it to the machine: reposition the container under
the spouts;
button (which blinks rapidly) to start the
rinse: the medium intensity Led blinks to indicate that
step 2 of the descale cycle is in progress;
the coffee and hot water spouts;
Step 3: Second rinse
first rinse. Remove and empty the water tank, then fill
with fresh drinking water up to the MAX level (fig. 44) and
reinstate the softener filter, if in use; return the tank to the
machine and reposition the container under the spouts;
button (which blinks rapidly) to start the
rinse: the strong intensity Led blinks to indicate that step
3 of the descale cycle is in progress; the rinse fluid will
flow from the hot water spout; (*)
Step 4: Completion of descale
procedure
up, the descale cycle has been correctly terminated;
remove the container in which the rinse water is collect-
ed and empty it; take out the drip tray and empty the
grounds container, where part of the rinse water will have
been collected. Reposition all the parts in the machine.
B
A
45