Edit A Number/Name Stored In The Directory; Delete A Number/Name Stored In The Directory - VTech ia5839 User Manual

Telephone Directory
first ring. Choose N for a normal ringing pattern.
8. Press SELECT or PROG to confirm your selection. If you chose Y, a
displayed with the directory entry.
NOTE: When memory is full the screen displays MEMORY FULL, an error tone
sounds, and you will not be able to store a new number until you delete a stored
number.

Edit a Number/Name Stored in the Directory

1. Press . The screen displays DIRECTORY.
2. Press or to scroll alphabetically through the entries stored in the directory.
-OR-
Press the dial pad key for the first letter of the entry you want to edit.
3. When the screen displays the entry you want to edit, press SELECT. Then
press or until EDIT flashes.
SPEED
8005959511
4. Press SELECT. The screen displays the name and number. The cursor ap-
pears at the end of the name. Use
name. Press SELECT to move on to edit the number. Use
and make corrections. Press SELECT to move on to edit the distinctive ring setting.
5. Press SELECT to save the edited information.

Delete a Number/Name Stored in the Directory

1. Press . The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries in the directory.
-OR-
Press the dial pad key for the first letter of the entry you want to delete.
3. When the screen displays the entry you want to delete, press SELECT. Then
press or until ERASE flashes.
SPEED
8005959511
4. Press SELECT. The screen displays ERASE NO YES and the number.
The current choice flashes.
5. Press or until YES flashes.
6. Press SELECT. You'll hear a confirmation beep.
EDIT ERASE
EDIT ERASE
, and the dial pad keys to edit the
18
D
will be
to backspace