Call Transfer; Conference Call; Find Handset - VTech i6785 User Manual

Handset operation

Call transfer

• While on an external call, any system handset (HS1) can transfer the call to another system handset
• For the FIND
HANDSET
function to work,
• HS2 will ring and the screen will show HS1 IS CALLING
the system
• Pick up the intercom call on HS2 by pressing
handsets need
• An intercom call is established and HS1 can communicate with HS2 prior to the external call being
to be in idle (off)
mode
If the transferred call is not answered within 100 seconds, the external call will be returned to HS1
and the screen will show CALL BACK

Conference call

It is possible to establish a conference call between two handsets and
the external line
While one handset is already connected to the external line, the other
handset can join the call by pressing
immediately established, both handsets will show:

Find handset

• To locate a misplaced handset, press FIND HANDSET on the base to
• To end the page at the base, press FIND HANDSET again
• To end the page at the handset, press
16
(HS2) by pressing INT The external call is put on hold automatically Then select the handset
number to be transferred
transferred CALL TRANSFERRED will briefly display on HS1.
page all system handsets
dial pad key (0-9, *, #)
www vtechphones com
/FLASH
A conference call will be
, SPEAKER, OFF or any
PHONE 00:00:25
** PAGING **