Review Your Announcement; Answering System Feature Setup - VTech i6764 User Manual

Answering system operation
. With the system set for the desired answer mode
(normal or announcement only) press MENU until
you hear "Announcement. Press MAILBOX or press
RECORD. To continue setup, press MENU. "
2. Press REC/MEMO. After you hear "Record after the
tone. Press MAILBOX when you are done." followed
by a beep, speak toward the base to record an an-
nouncement up to 90 seconds long.
3. Press any PLAY/STOP button to stop recording.The
system plays back your recorded message.

Review your announcement:

. Press MENU until you hear "Announcement. Press MAILBOX or press RECORD.
To continue setup, press MENU. "
2. Press any PLAY/STOP button. The system plays the current announce-
ment.
Delete your announcement:
Press DELETE during announcement playback.
The system will use the pre-recorded announce-
ment until you record a new one.

Answering system feature setup

You can set up one feature at a time, or you can
set up one feature then move on to set up features
in sequence.
. Make sure the answering system is on.
2. Press and release MENU until you hear the
system announce the feature you want to set.
Refer to Feature Summary on page 25 for a
description of the features and options.
3. Press CHANGE until the system announces
the desired setting.
4. Press TIME/SET.
5. Press MENU to move on to the next feature,
or press a mailbox button to confirm your
selection and exit feature setup.
25