Edit A Number/Name Stored In The Directory - VTech gz2437 Operating Instructions Manual

7 Press or to change the setting. Choose (for Yes) if you wish the phone
to alert you to calls from this number by changing to a distinctive ringing pattern
after the first ring. Choose (for NO) for a normal ringing pattern.
8 Press SELECT or PROG to confirm your selection. If you chose , the screen
displays:
Note: If chose , you can skip to Step 10.
9 The Melody name will blink. Press
press SELECT or PROG to confirm your selection. The screen displays:
10 Press or to change the setting. Choose
to show an animation when the incoming call matches this number. Choose
(for NO) for no animation. Your choices of animations are:
or
11 Press SELECT or PROG to confirm your selection. If you chose , the screen
will display one of the 2 animations. Press
press SELECT or PROG to confirm your desired option. You'll hear a long beep
confirming your entry. When you select
directory entry.
Note: When memory is full the screen displays
and you will not be able to store a new number until you delete a stored number.

Edit a Number/Name Stored in the Directory

1 Press ( ). The screen displays
2 Press or to scroll alphabetically through entries stored in memory
-OR-
Press the dial pad key for the first letter of the entry you want to edit.
3 When the screen displays the number you want to edit, press SELECT . Then press
or until flashes.
Telephone Directory
or to choose the desired Melody. Then
(for Yes) if you wish the phone
alternately
alternately
or
in step 7 , a will be displayed with the
MEMORY FULL
.
11
to change the setting, then
, an error tone sounds,