Redragon M656 Gainer Wireless - Gaming Mouse Manual

Table of Contents

Contents

1 OS support
2 How to connect the device
3 How to exit the power-saving status of the unit
4 How to reconnect the unit
5 Button Instructions
6 Bottom Instructions
7 DPI level Indication
8 Software Instructions
9 FAQ
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

OS support

Windows XP/Vista/Win7/Win8/Win10

How to connect the device

Take out the nano receiver in the package and plug it into any available USB port on your computer.
Place one piece of AA batteries (Note) in the mouse in proper directions.
Turn the switch on bottom of the mouse to "ON" or "Eco".
The mouse will be ready for work. The backlight of the LOGO will light on if the bottom switch is set to "ON". Otherwise, it does not light on.
Note: Batteries are not included in the package. Please remove the batteries for long time storage.

How to exit the power-saving status of the unit

Energy-Saving Auto-Sleep Mode:
The mouse will turn into sleep mode automatically with the backlight off when no action in 1 minute. Use (swipe/click) the mouse again to awake the mouse.

How to reconnect the unit

Under certain circumstances, such as high temperature, high magnetic or strong vibrate, the mouse may loss connection with the receiver. You need to reconnect them once again like this:

Re-plug the nano receiver.
Keep the mouse within about 30cm of the receiver, re-mount the batteries of the mouse. Turn the switch on the bottom of the mouse to "ON".
Press down and hold the right key, scroll wheel and the right key together for connecting.
The mouse will get connected thereafter.

Button Instructions

Left mouse button.
Right mouse button.
Scroll wheel (clicked as middle mouse button).
Side key, defaulted function: FORWARD key on the keyboard.
Side key, defaulted function: BACKWARD key on the keyboard.
DPI+ button (default set to add up the DPI value).
DPI- button (default set to decrease the DPI value).

Bottom Instructions

ON(Eco)/Off Switch: Turn on the mouse by switching it to "ON" or "Eco".
Teflon foot pads: Large wear-resistant materials let the mouse move more smoothly.

DPI level Indication

The red light working mode indicator locates inside the Scroll Wheel key.
Working mode 1 (1000 DPI): Flash once.
Working mode 2 (1500 DPI): Flash twice.
Working mode 3 (2000 DPI): Flash three times.
Working mode 4 (2400 DPI): Flash four times.
Working mode 5 (4000 DPI): Flash five times.

Software Instructions

User can change the following settings via the software associated.

Select the DPI value (1000, 1500, 2000, 2400, 4000)
Select the polling rate. (125Hz, 250Hz, 500Hz).
Continuous keystroke function: Set the number of clicks and delay time.
Customize 7 mouse buttons.

FAQ

If the mouse does not respond, please check whether the mouse is plugged correctly in the corresponding computer USB port. You can try with another USB port.
If the cursor is moving slowly, jumping or intermittent, please try another surface. Surfaces that are dark, dirty, not flat, or bright may affect the performance of the mouse. A mouse pad is recommended.

California Proposition 65

Risk of Cancer from [Name of one or more chemicals known to cause cancer] And Reproductive Harm From [Name of one or more chemicals known to cause reproductive toxicity] Exposure - www.P65Warnings.ca.gov.