Table of Contents
Advertisement
Quick Links
MIRAGE WIRELESS GAMING MOUSE
Feature
◆
2.4GHZ wireless connection, working range up to 10 meters
◆
USB high speed data transfer, polling rate up to 500Hz,
125Hz/250Hz/500Hz 3 level for option
◆
Pixzart 3330 sensor meet gaming user demand, low power, high
performance
◆
6 DPI：800/1200/1600/2400/3200/4800 CPI， With DPI indicator，
default in 1200DPI
◆
RF motion detecting light sources
◆
programmable buttons(Left key is not available)
◆
Multi-stage power saving mode, support power on/power off
◆
Back lighting with sleep mode function
◆
Low power indicator
◆
Nano Receiver, plug and play
Before use:
1. Find the wireless mouse and Nano receiver in package
2. Plug Nano receiver to USB port on PC
3. Switch the button at the bottom of mouse body, battery cover can be open (check the
pictures), Install 1PCS AA battery into Mouse body Properly
4. Put on power switch at the bottom of Mouse, LED indicator will keep flash for few
second, the Mouse is ready to work.
Product specification
1. DPI adjustable function
With 6 adjustable DPI
User Manual
M690
800/1200/1600/2400/3200/4800
, factory setting is
Advertisement
Table of Contents
Related Manuals for REDRAGON MIRAGE M690
Summary of Contents for REDRAGON MIRAGE M690
- Page 1 User Manual MIRAGE WIRELESS GAMING MOUSE M690 Feature ◆ 2.4GHZ wireless connection, working range up to 10 meters ◆ USB high speed data transfer, polling rate up to 500Hz, 125Hz/250Hz/500Hz 3 level for option ◆ Pixzart 3330 sensor meet gaming user demand, low power, high performance ◆...
- Page 2 1200DPI. Press the switch button at bottom of Mouse can easy to adjust DPI(check picture for the button). LED indicator( will flash one time while it converting to 800DPI, LED will flash twice while it converting to 1200DPI, LED will flash three times while it converting to 1600CPI,4 times for 2400DPI,5 times for 3200DPI,6 times for 4800DPI.
- Page 3 FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the MIRAGE M690 and is the answer not in the manual?
Questions and answers
Что делать мигает не работает я вам пробовал я не чуть-чуть залил
If your REDRAGON MIRAGE M690 got wet and is flashing but not working, follow these steps:
1. Turn It Off – Switch off the mouse immediately to prevent further damage.
2. Remove the Battery – Open the battery cover and take out the AA battery to stop power flow.
3. Dry the Mouse – Use a dry cloth to remove visible moisture. Let it air dry in a well-ventilated area for at least 24 hours. Avoid using heat sources like hairdryers.
4. Check for Residual Moisture – Ensure the internal components are completely dry before reinserting the battery.
5. Reconnect the Mouse – Reinstall the battery and follow the reconnection steps:
- Plug out and reinsert the Nano receiver.
- Move the mouse within 50 cm of the receiver.
- Press any key within 15 seconds to reconnect.
If the mouse still does not work, there may be internal damage, and it may need repair or replacement.
This answer is automatically generated