REDRAGON M808-KS STORM PRO Operating Instructions

REDRAGON M808-KS STORM PRO Operating Instructions

Honeycomb wired & wireless optical gaming mouse

Advertisement

Quick Links

M808-KS STORM PRO Honeycomb WIRED & WIRELESS OPTICAL GAMING MOUSE
OPERATING INSTRUCTIONS
Dear user,
Thank you for choosing our REDRAGON product. To protect your rights and for better
customer service, we ask that you note our warranty rules.
1. Within 18 months of purchase date, repair is guaranteed for failure due to electrical
circuit problems. Man-made damages, such as disassembly, hard impacts,
submersion into water, plugging into improper current or voltage, and damage caused
by natural disasters such as fire, flood, or earthquake are not included.
2. Consumable parts (such as foot pad) and spare parts replacement are not included in
our warranty.
OS Support
Windows XP/ Vista/ Win 7/ Win 8/ Win 10

Button Description

1. Left mouse button.
2. Right mouse button.
3. Scroll wheel and middle button
4. Forward button
5. Backward button
6. DPI+ button (defaulted to speed up the cursor).
7. DPI- button (defaulted to slow down the cursor).
8. Polling rate switch button
9. Working Mode button (used to switch among the two working modes)
10. Power Switch: Power On with LED ON/ Power OFF / Power On without LED

Basic Operation:

How to Connect the Mouse with a Computer

Wired Connection

1. Take out the USB to USB C cable in the package and connect the mouse with your
computer.
2. Slide the power switch on the bottom of the mouse to Power On with LED ON or Power On
without LED.
3. The computer will recognize and configure the mouse automatically.
4. The mouse will be ready for use when the configuration is finished. The LED on left and
right size will light on then if the power switch on the bottom of the mouse to Power On with
LED ON.
5. The mouse is under recharging whatever the power switch is put to On with or without
LED ON. The scroll wheel will light up if the power switch is put to Power ON with LED ON.
And it does not light up if the power switch is put to Power On without LED .It may take
about four hours for the mouse to be fully recharged.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M808-KS STORM PRO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for REDRAGON M808-KS STORM PRO

  • Page 1 OPERATING INSTRUCTIONS Dear user, Thank you for choosing our REDRAGON product. To protect your rights and for better customer service, we ask that you note our warranty rules. 1. Within 18 months of purchase date, repair is guaranteed for failure due to electrical circuit problems.
  • Page 2 Wireless Connection 1. Take out the USB receiver in the package and plug it into any available USB port on your computer. 2. Slide the power switch on the bottom of the mouse to Power On with LED ON or Power On without LED.
  • Page 3 The mouse may lost connection with the USB receiver for some occasional reasons such as strong magnet, violent vibration. So you may need to reconnect the mouse with the USB receiver. In this case, unplug the receiver and plug it back again. Slide the power switch on the bottom of the mouse to ON, press and hold the Left, Middle and Right button at the same time till the scroll wheel lights up and flash in yellow.
  • Page 4 1. If the mouse is not responding, please check whether the mouse is turned on or plugged properly in the corresponding computer USB port, or try another USB port. 2. If the cursor is moving slowly, jumping or intermittent, please try another surface. Surfaces that are dark, dirty, not flat, or bright may affect the performance of the mouse.
  • Page 5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation...

Table of Contents

Save PDF