REDRAGON SHARK M688 User Manual

Before use:

1. Find the wireless mouse and Nano receiver in package
2. Plug Nano receiver to USB port on PC
3. 2PCS AA battery into Mouse body Properly
4. LED indicator will keep flash for few seconds, the Mouse is ready to work.

Advanced function

1. CPI adjustable function

With 6 adjustable CPI
1000CPI. Press the switch button on top of Mouse can easy to adjust CPI. LED
indicator will flash one time while it converting to 500CPI, LED will flash twice
while it converting to 1000CPI, LED will flash three times while it converting
to 2000CPI.

2. Saving power mode and power switch off

If mouse is stay out of work for 8 minutes, it will turn to power saving mode,
press any button to restart it.
If you turn off PC or take out Nano receiver from USB port, press any button or
move the mouse to enter the power saving mode,

3, Nano receiver

A very small size design for Nano receiver, it can be plug and stay on USB port
of PC/Notebook without interference.
Portable design for travel, Nano receiver can be plug in the slot on bottom of
mouse
4. IT have 3 report rate. With the 500 repoart rate is default.

Reconnection

Both of mouse and Nano receiver has a built-in code, It can be setting one mouse
to one receiver, or few of mouse to one receiver. Mouse and receiver need to
reconnect under the condition of High temperature, high magnetic, strong vibrate.
1. Plug off nano receiver from USB port, and plug it on
2. Press M key and R key at the same time.
3. You can use it by reconnection
Remark
Design by approval IR motion detect technology
Data transfer by 2.4G wireless connection in 10 meters operating range, working
range will less than 10 meters if there is physics bothered.
Caution
Any amendment unauthorized is not allowing.
User Manual
SHARK WIRELESS GAMING MOUSE
M688
500/1000/2000/3000/4000/7200
, factory setting is