Makita DCL285FZ Instruction Manual page 17

When the mesh filter gets dirty badly, clean it in the
following procedures.
Turn the mesh filter in the direction of the arrow
1.
and remove it while the hooks are unlocked.
Fig.48
► 1. Mesh filter 2. Hook
Remove the dust on the mesh filter and then wash
2.
it with water. After that, dry it thoroughly.
Insert the mesh filter into the base while the hooks
3.
are aligned with the port. Turn the mesh filter in the
direction of the arrow until the hooks are locked with a
click. Make sure that the mesh filter is installed securely.
Fig.49
► 1. Mesh filter 2. Hook 3. Port
2
1
2
1
3
17 ENGLISH