Security; Boot - DFI AL051-TC-E3930 User Manual

Security

InsydeH2O Setup Utility
Main Advanced Security

Boot

Current TPM Device <TPM 2.0 (FTPM)>
TPM State All Hierarchies Enabled, UnOwned
TPM Availability <Available>
TPM Operation <No Operation>
Clear TPM [ ]
Supervisor Password Not installed
Set Supervisor Password
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
TPM Availability
Show or hide the TPM availability and its configurations.
TPM Operation
Enable or disable the TPM function. It displays the following options:
No Operation No changes to current state.
Enable Enable and activate TPM.
Disable Disable and activate TPM.
Clear TPM
Remove all TPM context associated with a specific owner.
Set Supervisor Password
Set the supervisor's password and the length of the password must be greater than
one character.
Chapter 3 BIOS Setup Chapter 3 BIOS Setup
Rev. 5.0
Exit
When Hidden, don't ex-
poses TPM to 0
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 3
Boot
Main Advanced
Setup Prompt Timeout
Numlock
Quiet Boot
Network Stack
PXE Boot capability
USB Boot
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Setup Prompt Timeout
Setup the number of seconds that the firmware will wait before booting the original
default boot selection.
Numlock
Select the power-on state for numlock.
Quiet Boot
Enable or disable booting in text mode.
Network Stack
This field is used to enable or disable network stack.
PXE Boot capability
Disabled Suppoort Network Stack
UEFI IPv4/IPv6
USB Boot
Enable or disable booting to USB boot devices.
33 33
InsydeH2O Setup Utility
Security Boot Exit
The number of seconds
that the firmware will wait
[0]
before booting the original
<On>
default boot selection.
<Disabled>
<Disabled>
<Disabled>
<Enabled>
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0
www.dfi.com www.dfi.com