DFI AL051-TC-E3930 User Manual page 30

Console Redirection
This section configures settings relevant to console redirection.
InsydeH2O Setup Utility
Advanced
Console Serial Redirect <Disabled>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Console Serial Redirect
This field is used to enable or disable the console serial redirection function.
Chapter 3 BIOS Setup Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Enable Console Redirec-
tion Function
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

When Console Serial Redirect is set to enabled, the screen will appear like below:
Advanced
Console Serial Redirect <Enabled>
Terminal Type <VT_100>
Baud Rate <115200>
Data Bits <8 Bits>
Parity <None>
Stop Bits <1 Bit>
Flow Control <None>
COMA

Enable VT-100, 115200, N81
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Terminal Type
Select terminal type: VT_100, VT_100+, VT_UTF8 or PC_ANSI.
Baud Rate
Select baud rate: 115200, 57600, 38400, 19200 or 9600.
Data Bits
Select data bits: 7 Bits or 8 Bits.
Parity
Select parity bits: None, Even or Odd.
Stop Bits
Select stop bits: 1 Bit or 2 Bits.
Flow Control
Select flow control type: None, RTS/CTS or XON/XOFF.
30 30
InsydeH2O Setup Utility Rev. 5.0
Enable Console Redirec-
tion Function
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com www.dfi.com