1. Manuals
  2. Brands
  3. DFI Manuals
  4. Single board computers
  5. HU551
  6. User manual

DFI HU551 User Manual

Embedded sbc 3.5”
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HU551/HU553
Embedded SBC 3.5"
User's Manual
A-339-M-2008

Advertisement

Table of Contents
loading

Related Manuals for DFI HU551

Summary of Contents for DFI HU551

  • Page 1 HU551/HU553 Embedded SBC 3.5” User’s Manual A-339-M-2008...

  • Page 2: Copyright

    Copyright FCC and DOC Statement on Class B This publication contains information that is protected by copyright. No part of it may be re- This equipment has been tested and found to comply with the limits for a Class B digital produced in any form or by any means or used to make any transformation/adaptation without device, pursuant to Part 15 of the FCC rules.

  • Page 3: Table Of Contents

    Appendix A - Watchdog Sample Code LVDS Channel and bpp Select ..............14 ..........78 Rear Panel I/O Ports ................. 15 Appendix B - System Error Message 12V DC-in (HU551)/15~36V DC-in (HU553) ..........15 ........... 79 Graphics Interfaces ..................16 RJ45 LAN Ports ................... 16 Appendix C - Troubleshooting ..............80 USB Ports ....................

  • Page 4: About This Manual

    About this Manual Static Electricity Precautions This manual can be downloaded from the website, or acquired as an electronic file included in It is quite easy to inadvertently damage your PC, system board, components or devices even the optional CD/DVD. The manual is subject to change and update without notice, and may be before installing them in your system unit.

  • Page 5: About The Package

    About the Package The package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for assistance. • One HU551/HU553 board • One Serial ATA data cable • One Serial ATA power Y cable • One QR (Quick Reference) • One Heat sink with fan Optional Items •...

  • Page 6: Chapter 1 - Introduction

    Chapter 1 Chapter 1 - Introduction Specifications ® Processor • 4th generation Intel Core processors Rear Panel I/O • 1 12V (HU551) or 15~36V (HU553) DC-in jack ® : Intel Core i7-4650U, 4M Cache, up to 3.3 GHz, 15W or 4-pin power connector* (optional) Ports ® : Intel Core i5-4300U, 3M Cache, up to 2.9 GHz, 15W • 2 DP (default) or 2 HDMI ports* (optional)

  • Page 7: Features

    USB 1.1 (12Mb/s). USB 3.0 reduces the time required for data transmission, reduces power consumption, and is backward compatible with USB 2.0. It is a marked improvement in device transfer speeds between your computer and a wide range of simultaneously accessible external Plug and Play peripherals. Chapter 1 Introduction www.dfi.com...

  • Page 8: Chapter 2 - Hardware Installation

    Chapter 2 Chapter 2 - Hardware Installation Board Layout USB 1-2 Power Mini PCIe Signal Backlight Power Select (JP26) Select (JP17) Select (JP18) Chassis Intrusion PTN3460 Front LVDS LCD LVDS Channel Audio Auto Power-on Panel and bpp Select Select (JP22) (SW1) USB 4-5 Power Realtek...

  • Page 9: Block Diagram

    Chapter 2 Block Diagram Mechanical Diagram Channel A HD Audio 1600MHz DDR3L SODIMM GLAN PCIe x1 PTN3460 LVDS I210AT 7.22 DP or HDMI PCIe x1 GLAN 19.2 SM Bus DP or HDMI I218 Core 31.42 SATA3.0 SATA3.0 SATA 2x 35.8 i7/i5/i3 PCIe x1 Mini PCIe/...

  • Page 10: System Memory

    Chapter 2 Installing the DIMM Module Important: Electrostatic discharge (ESD) can damage your board, processor, disk drives, add-in Note: boards, and other components. Perform installation procedures at an ESD workstation The system board used in the following illustrations may not resemble the actual only.

  • Page 11: Jumper Settings

    Chapter 2 Jumper Settings 5. Grasping the module by its edges, align the module into the socket at an approximately 30 degrees angle. Apply firm even pressure to each end of the module until it slips down into the socket. The contact fingers on the edge of the module will almost completely disappear Clear CMOS Data inside the socket.

  • Page 12: Auto Power-On Select

    Chapter 2 Auto Power-on Select USB Power Select JP22 1-2 On: Power-on via power button 1-2 On: +5V 2-3 On: (default) (default) +5V_standby USB 1-2 (JP26) 2-3 On: Power-on via AC power USB 4-5 (JP25) 1-2 On: +5V (default) USB 3-4 (JP23) 1-2 On: +5V (default)

  • Page 13: Panel Power Select

    Chapter 2 Panel Power Select Backlight Power Select JP18 1-2 On: +12V 2-3 On: +5V (default) 1-2 On: +12V 3-4 On:+5V 5-6 On: +3.3V (default) JP7 is used to select the power supplied with the LCD panel. JP18 is used to select the power level of backlight brightness control: +12V or +5V. Important: Important: Before powering-on the system, make sure that the power settings of JP7 match the...

  • Page 14: Mini Pcie Signal Select

    Chapter 2 Mini PCIe Signal Select LVDS Channel and bpp Select JP17 1-2 On: PCIe (default) 1 On: Single LVDS 1 Off: Dual LVDS 2-3 On: mSATA 2 On: VESA (24bpp) 2 Off: JEIDA or VESA (18bpp) JP17 is used to select the Mini PCIe signal: PCIe (default) or mSATA. Switch 1 allows you to select the LVDS channel and the color of bits per pixel.

  • Page 15: Rear Panel I/O Ports

    USB 3.0 The rear panel I/O ports consist of the following: DC-in • 1 12V (HU551) or 15~36V (HU553) DC-in jack or 4-pin power connector* (optional) • 2 DP (default) or 2 HDMI ports* (optional) • 2 RJ45 LAN ports •...

  • Page 16: Graphics Interfaces

    Install the graphics driver. Refer to chapter 4 for more information. Configure the onboard LAN in the Chipset menu (“PCH-IO Configuration” submenu) of the BIOS. Refer to chapter 3 for more information. Driver Installation Install the LAN drivers. Refer to chapter 4 for more information. Chapter 2 Hardware Installation www.dfi.com...

  • Page 17: Usb Ports

    USB port cables to a connector. BIOS Setting Configure the onboard USB in the Advanced menu (“USB Configuration” submenu) of the BIOS. Refer to chapter 3 for more information. Chapter 2 Hardware Installation www.dfi.com...

  • Page 18: I/O Connectors

    The front audio connector allows you to connect to the second line-out and mic-in jacks that are at the front panel of your system. Pins Function Driver Installation DIO7 Install the audio driver. Refer to the chapter 4 for more information. DIO6 DIO5 DIO4 DIO3 DIO2 DIO1 DIO0 Chapter 2 Hardware Installation www.dfi.com...

  • Page 19: Com (Serial) Ports

    (1) 8 data bits + 1 parity bit + 1 stop bit (2) 8 data bits + 1 parity bit + 2 stop bits RST Signal Ground RESET-SW (3) 8 data bits + 2 stop bits PWR-BTN N.C. Signal Chapter 2 Hardware Installation www.dfi.com...

  • Page 20: Sata (Serial Ata) Connectors

    ATA data cable to a SATA connector and the other end to your Serial ATA device. BIOS Setting Configure the Serial ATA drives in the Advanced menu (“SATA Configuration” submenu) of the BIOS. Refer to chapter 3 for more information. Chapter 2 Hardware Installation www.dfi.com...

  • Page 21: Lvds Lcd Panel Connector

    Configure the LCD panel in the Advanced/Chipset Features submenu of the Panel Power Panel Power BIOS. Refer to chapter 3 for more information. Note: DFI board's LVDS connector: Hirose DF13-40DP-1.25V(91)/40P/1.25mm; cable side connector: Hirose DF13-40DS-1.25C. Chapter 2 Hardware Installation www.dfi.com...

  • Page 22: Expansion Slots

    The SIM slot on the system board is used to insert a SIM card. BIOS Setting The Advanced menu (“NCT6106D HW Monitor” submenu) of the BIOS will display the current speed of the cooling fans. Refer to chapter 3 for more information. Chapter 2 Hardware Installation www.dfi.com...

  • Page 23: Smbus Connector

    When the system’s power is off and a chassis intrusion occurred, the alarm will sound only when the system restarts. Chapter 2 Hardware Installation www.dfi.com...

  • Page 24: Standby Power Led

    Safety Measures • Danger of explosion if battery incorrectly replaced. • Replace only with the same or equivalent type recommend by the manufacturer. • Dispose of used batteries according to local ordinance Chapter 2 Hardware Installation www.dfi.com...

  • Page 25: Chapter 3 - Bios Setup

    Chapter 3 Chapter 3 - BIOS Setup Legends Overview Keys Function The BIOS is a program that takes care of the basic level of communication between the CPU and peripherals. It contains codes for various advanced features found in this system board. Right and Left arrows Moves the highlight left or right to select a menu.

  • Page 26: Ami Bios Setup Utility

    Chapter 3 AMI BIOS Setup Utility Advanced The Advanced menu allows you to configure your system for basic operation. Some entries are Main defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference. The Main menu is the first screen that you will see when you enter the BIOS Setup Utility.
  • Page 27 Chapter 3 ACPI Settings Trusted Computing This section is used to configure the system ACPI parameters. This section configures settings relevant to Trusted Computing innovations. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced Advanced Confi...
  • Page 28 Chapter 3 CPU Configuration EIST This section is used to configure the CPU. It will also display the detected CPU information. This field is used to enable or disable the Intel Enhanced SpeedStep Technology. Turbo Mode Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced The options are Enabled or Disabled.
  • Page 29 Chapter 3 SATA Configuration Intel(R) Rapid Start Technology This section is used to configure the settings of SATA device. This section is used to enable or disable the Intel Rapid Start Technology. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
  • Page 30 Chapter 3 AMT Configuration Entry on S3 RTC Wake This section configures the parameters of Active Management Technology. This field is used to enable or disable the rapid start invocation upon S3 RTC wake. Entry After Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced Enables RTC wake timer at S3 entry.
  • Page 31 Chapter 3 USB Configuration PCH-FW Configuration This section is used to configure the parameters of the USB device. This section only displays the parameters of Management Engine Technology. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced Advanced Enables Legacy USB sup-...
  • Page 32 Chapter 3 Super IO Configuration This section is used to configure the I/O functions supported by the onboard Super I/O chip. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced Advanced Windows/Linux (DOS) for...
  • Page 33 Chapter 3 Serial Port PC Health Status Enables or disables the serial COM port. This section displays the hardware health monitor. Change Settings Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced Selects the IO/IRQ settings for the super I/O device. PC Health Status Smart Fan function setting...
  • Page 34 Chapter 3 CPU Smart Fan Control Power Failure Control When this feature is set to Automatic, the CPU’s fan speed will rotate according to the This section configures the status control when the power failure occurs. CPU’s temperature. The higher the temperature, the faster the speed of rotation. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
  • Page 35 Chapter 3 WatchDog Configuration Network Stack This section sets the system watchdog parameters. This section is used to enable or disable UEFI network stack. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced Advanced Network Stack...
  • Page 36 Chapter 3 Ipv4 PXE Support Intel(R) Ethernet Connection I218-LM - 88:88:88:88:87:88... When enabled, Ipv4 PXE boot supports. When disabled, Ipv4 PXE boot option will not This section is used to configure the parameters of the Gigabit Ethernet device. be created. Ipv6 PXE Support Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
  • Page 37 Chapter 3 NIC Configuration Intel(R) I210 Gigabit Network Connection - 00:01:29:45... This field is used to configure the Boot Protocol, Wake on LAN, Link Speed and VLAN. This section is used to configure the parameters of the Gigabit Ethernet device. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

  • Page 38: Chipset

    Chapter 3 Chipset NIC Configuration This field is used to configure the Boot Protocol, Wake on LAN, Link Speed and VLAN. This section configures relevant chipset functions. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced Main Advanced...
  • Page 39 Chapter 3 PCH-IO Configuration PCI Express Configuration This section illustrates the PCH parameters. This field is used to configure the PCI Express settings. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Chipset Chipset PCI Express Confi...
  • Page 40 Chapter 3 System Agent (SA) Configuration USB Configuration This section is used to configure the parameters of System Agent. This field is used to configure the USB settings. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Chipset Chipset USB Confi...
  • Page 41 Chapter 3 Graphics Configuration LCD Control This field configures the graphics settings. This field configures the LCD control. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Chipset Chipset LCD Control Select the Video Device Graphics Confi...
  • Page 42 Chapter 3 Memory Configuration Active LVDS This field only displays the memory configuration. Enables or disables the LVDS function. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Chipset Memory Information Memory RC Version 1.7.0.0 Memory Frequency 1600 Mhz Total Memory 2048 MB (DDR3) 1.35V...

  • Page 43: Boot

    Chapter 3 Boot CSM Parameters Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Boot Main Advanced Chipset Boot Security Save & Exit Boot Confi guration This option controls if Launch CSM [Enabled] Number of seconds to...

  • Page 44: Security

    Chapter 3 Security Save & Exit Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Reset the system after Password Description...

  • Page 45: Updating The Bios

    Chapter 3 Updating the BIOS Notice: BIOS SPI ROM To update the BIOS, you will need the new BIOS file and a flash utility, AFUDOS.EXE. Please 1. The Intel Management Engine has already been integrated into this system board. Due to ®...

  • Page 46: Chapter 4 - Supported Software

    Install drivers, utilities and software applications that are required to facilitate and enhance the performance of the system board. You may acquire the software from your sales representa- tives, from an optional DVD included in the shipment, or from the website download page at https://www.dfi.com/DownloadCenter. Auto Run Page (For Windows 7) Note: This step can be ignored if the applications are standalone files.
  • Page 47 Chapter 4 Intel Chipset Software Installation Utility 3. Go through the readme document for more installa- tion tips then click Next. The Intel Chipset Software Installation Utility is used for updating Windows INF files so that ® the Intel chipset can be recognized and configured properly in the system. To install the utility, click “Intel Chipset Software Installation Utility”...
  • Page 48 Chapter 4 Intel HD Graphics Drivers 3. Go through the readme document for system re- quirements and installation To install the driver, click “Intel HD Graphics Drivers” on the main menu. tips then click Next. 1. Setup is now ready to install the graphics driver.
  • Page 49 Chapter 4 Intel Management Engine Drivers 9.5 3. Setup is currently installing the driver. After installation has com- pleted, click Next. To install the driver, click “Intel Management Engine Drivers 9.5” on the main menu. 1. Setup is ready to install the driver. Click Next.
  • Page 50 Chapter 4 Audio Drivers Intel LAN Drivers To install the driver, click “Audio Drivers” on the main menu. To install the driver, click “Intel LAN Drivers” on the main menu. 1. Setup is ready to install the 1. Setup is ready to install the driver.
  • Page 51 DFI Utility 4. Click Install to begin the installation. DFI Utility provides information about the board, Watchdog,and DIO. To access the utility, click “DFI Utility” on the main menu. Note: If you are using Windows 7, you need to access the operating system as an administrator to be able to install the utility.
  • Page 52 Chapter 4 3. Click “Install” to begin the The DFI Utility icon will appear on the desktop. Double-click the icon to open the utility. installation. 4. After completing installa tion, click “Finish”. Information HW Health Chapter 4 Supported Software www.dfi .com...
  • Page 53 Chapter 4 HW Health Set WatchDog Chapter 4 Supported Software www.dfi .com...
  • Page 54 Chapter 4 Microsoft Framework 4.5 3. After completing installation, click Finish. To install the utility, click “Microsoft Framework 4.5” on the main menu. 1. Read and accept the license agree- ment. Then, click “Installation“. 2. Setup is installing the driver. Chapter 4 Supported Software www.dfi...
  • Page 55 Chapter 4 Intel USB 3.0 Drivers (For Windows 7 Only) 3. Go through the readme docu- ment for more installation tips then click Next. To install the driver, click “Intel USB 3.0 Driver” on the main menu. 1. Setup is ready to install the driver. Click Next.
  • Page 56 Chapter 4 Intel Dynamic Platform and Thermal Framework 7.1 3. After the setup progress finishes, click Next to continue.. The Intel Dynamic Platform and Thermal Framework Technology enables the control of power and temperature management for the system protection. To install the driver, click “Intel Dynamic Platform and Thermal Framework 7.1” on the main menu.
  • Page 57 Chapter 4 Intel Rapid Storage Technology 3. Read the license agreement then click Yes. The Intel Rapid Storage Technology is a utility that allows you to monitor the current status of the SATA drives. It enables enhanced performance and power management for the storage subsystem.
  • Page 58 Chapter 4 Intel Rapid Start Technology 6. Click “Yes, I want to restart my computer now” then click Finish. The Intel Rapid Start Technology is a utility that allows your system to wake up and run faster. Restarting the system will allow the To install the driver, click “Intel Rapid Start Technology”...
  • Page 59 Chapter 4 Infineon TPM Driver and Tool (optional) Enter the necessary information and then click Next. To install the driver, click “Infineon TPM driver and tool (option)” on the main menu. The setup program is preparing to install the driver. Select a setup type and then click Next.
  • Page 60 Chapter 4 TPM requires installing the Microsoft 10. Click “Yes“ to restart your system. Visual C++ package prior to install- ing the utility. Click Install. The setup program is currently installing the Microsoft Visual C++ package. Click Finish. Chapter 4 Supported Software www.dfi...
  • Page 61 Chapter 4 Adobe Acrobat Reader 9.3 To install the reader, click “Adobe Acrobat Reader 9.3” on the main menu. 1. Click Next to install or click Change Destination Folder to select another folder. 2. Click Install to begin installa- tion. 3.

  • Page 62: Chapter 5 - Digital I/O Programming Guide

    Chapter 5 Chapter 5 - Digital I/O Programming Guide The Configuration Register (register 3) configures the direction of the I/O pins. If a bit in this register is set to 1, the corresponding port pin is enabled as an input with a high-impedence Register Description output driver.
  • Page 63 Chapter 5 Function Description GPIO Output Process I2CWriteByte(SlaveAddr, SubAddr, Data): #defi ne SLAVE_ADDR 0x42 Write a Byte data to a specified I2C Device. #defi ne INPUT_PORT 0x00 #defi ne OUTPUT_PORT 0x01 I2CReadByte(SlaveAddr, SubAddr, *Data): 0x02 #defi ne INVERSION_PORT Read a Byte data from a specified I2C Device. 0x03 #defi...

  • Page 64: Chapter 6 - Raid

    Chapter 6 Chapter 6 - RAID Settings The system board allows configuring RAID on Serial ATA drives. It supports RAID 0, RAID 1, To enable the RAID function, the following settings are required. RAID 5 and RAID 10. 1. Connect the Serial ATA drives. RAID Levels 2.
  • Page 65 Chapter 6 Step 4: Install the RAID Driver During OS Installation Step 5: Install the Intel Rapid Storage Technology Utility The RAID driver must be installed during the Windows XP or Windows 2000 installation us- The Intel Rapid Storage Technology Utility can be installed from within Windows. It allows ®...
  • Page 66 Chapter 6 5. Go through the readme 8. Click “Yes, I want to restart document to view system this computer now” to requirements and installa- complete the installation tion information then click and then click Finish. Next. 6. Click Next to install to the default folder or click change to choose another destination folder.

  • Page 67: Chapter 7 - Intel Amt Settings

    Chapter 7 Chapter 7 - Intel AMT Settings Enable Intel AMT in the AMI BIOS ® Overview 1. Power-on the system then press <Del> to enter the main menu of the AMI BIOS. Intel Active Management Technology (Intel AMT) combines hardware and software solution to ®...

  • Page 68: Extension (Mebx) Screen

    Chapter 7 Enable Intel AMT in the Intel Management 4. In the Save & Exit menu, select Save Changes and Reset then select OK. ® ® Engine BIOS Extension (MEBX) Screen Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset...
  • Page 69 Chapter 7 3. Enter a new password in the space provided under Intel(R) ME New Password then press 4. You will be asked to verify the password. Enter the same new password in the space pro- Enter. The password must include: vided under Verify Password then press Enter.
  • Page 70 Chapter 7 6. Select Change Intel(R) ME Password then press Enter. Select Local FW Update then press Enter. Select Enabled then press Enter. You will be prompted for a password. The default password is “admin”. Enter the default password in the space provided under Intel(R) ME New Password then press Enter. Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Copyright(C) 2003-13 Intel Corporation.
  • Page 71 Chapter 7 In the Intel(R) AMT Configuration menu, select Manageability Feature Selection In the SOL/IDER/KVM menu, select Username and Password then press Enter. then press Enter. Select Disabled then press Enter. Select Disabled then press Enter. Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Copyright(C) 2003-13 Intel Corporation.
  • Page 72 Chapter 7 In the SOL/IDER/KVM menu, select IDER then press Enter. Select Disabled then In the SOL/IDER/KVM menu, select Legacy Redirection Mode then press Enter. press Enter. Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Copyright(C) 2003-13 Intel Corporation.
  • Page 73 Chapter 7 Select Previous Menu until you return to the Intel(R) AMT Configuration menu. Select In the User Consent menu, select Opt-in Configurable from Remote IT then press User Consent then press Enter. Enter. Select Disable Remote Control of KVM Opt-in Policy then press Enter. Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Copyright(C) 2003-13 Intel Corporation.
  • Page 74 Chapter 7 In the Intel(R) AMT Configuration menu, select Network Setup then press Enter. In the Intel(R) ME Network Name Settings menu, select Host Name then press Enter. Enter the computer’s host name then press Enter. Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Copyright(C) 2003-13 Intel Corporation.
  • Page 75 Chapter 7 Select Shared/Dedicated FQDN then press Enter. Select Shared or Dedicated then Select Previous Menu until you return to the Intel(R) ME Network Setup menu. Select press Enter. TCP/IP Settings then press Enter. Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Copyright(C) 2003-13 Intel Corporation.
  • Page 76 Chapter 7 In the Intel(R) AMT Configuration menu, select Unconfigure Network Access then In the Intel(R) Remote Setup And Configuration menu, select Current Provisioing press Enter. Mode then press Enter. Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Copyright(C) 2003-13 Intel Corporation.
  • Page 77 Chapter 7 In the Intel(R) AMT Configuration menu, select Power Control then press Enter. In the Intel(R) AMT Power Control menu, select Idle Timeout then press Enter. Enter the timeout value (1-65535). Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808 Copyright(C) 2003-13 Intel Corporation.

  • Page 78: Appendix A - Watchdog Sample Code

    Appendix A Appendix A - Watchdog Sample Code ;Software programming example: ;--------------------------------------------- ;(1) Enter Super IO Confi guration mode ;--------------------------------------------- DX,4EH AL,87H DX,AL DX,AL ;------------------------------------------------------------------------------------------- ;(2) Confi guration Logical Device 8, register CRF0/CRF1 (WDT Control/WDT timer) ;------------------------------------------------------------------------------------------- DX,4EH AL,07H ;Ready to Program Logical Device DX,AL DX,4FH AL,08H...

  • Page 79: Appendix B - System Error Message

    Appendix B Appendix B - System Error Message Hard Disk(s) fail (20) When the BIOS encounters an error that requires the user to correct something, either a beep HDD initialization error. code will sound or a message will be displayed in a box in the middle of the screen and the message, PRESS F1 TO CONTINUE, CTRL-ALT-ESC or DEL TO ENTER SETUP, will be shown in Hard Disk(s) fail (10) the information box at the bottom.

  • Page 80: Appendix C - Troubleshooting

    Appendix C Appendix C - Troubleshooting Checklist The picture seems to be constantly moving. Troubleshooting Checklist 1. The monitor has lost its vertical sync. Adjust the monitor’s vertical sync. 2. Move away any objects, such as another monitor or fan, that may be creating a magnetic This chapter of the manual is designed to help you with problems that you may encounter field around the display.
  • Page 81 Appendix C Hard Drive System Board 1. Make sure the add-in card is seated securely in the expansion slot. If the add-in card is Hard disk failure. loose, power off the system, re-install the card and power up the system. 1.

This manual is also suitable for:

Hu553

Table of Contents