Choosing The Keep Warm Mode; Cooking With A Preset - Philips HD9280-XL-Smart User Manual

ENGLISH
16
Note
• To remove large or fragile ingredients, use a pair of tongs to lift out the ingredients.
• Excess oil or rendered fat from the ingredients is collected on the bottom of the pan.
• Depending on the type of ingredients cooking, you may want to carefully pour off any
excess oil or rendered fat from the pan after each batch or before shaking or replacing
the basket in the pan. Place the basket on a heat-resistant surface. Wear oven-safe
gloves to pour off excess oil or rendered fat. Return the basket into the pan.
When a batch of ingredients is ready, the Airfryer is instantly ready for preparing another
batch.
Note
• Repeat steps 3 to 12 if you want to prepare another batch.

Choosing the keep warm mode

1
Press the On/Off button to turn on the Airfryer. (Fig. 7)
2
Press the menu button as often as the keep warm icon is blinking. (Fig. 16)
3
Press the On/Off button to start the keep warm mode. (Fig. 17)
Note
• The keep warm timer is set to 30 minutes. To change the keep warm time (1 - 30
minutes), press the time down button. The time will be confirmed automatically.
• The temperature cannot be changed in keep warm mode.
4
To pause the keep warm mode, press the On/Off button. To resume the keep warm
mode, press the On/Off button again.
5
To exit the keep warm mode, long press the On/Off button.
Tip
• If food like French fries loses too much crispness during the keep warm mode, either
shorten the keep warm time by switching off the appliance earlier or crisp them up for
2-3 minutes at the temperature of 180°C/350°F.
Note
• During the keep warm mode, the fan and heater inside of the appliance turn on from
time to time.
• The keep warm mode is designed to keep your food warm immediately after it is cooked
in the Airfryer. It is not meant for reheating.

Cooking with a preset

1
Follow steps 1 to 5 in chapter "Airfrying".
2
Press the Menu button. The frozen snacks icon is blinking. Press the Menu button as
often as your needed preset is blinking. (Fig. 18)
3
Start the cooking process by pressing the On/Off button. (Fig. 19)