Contents Caution Troubleshooting General issues Channel issues Important Picture issues Sound issues Your TV HDMI connection issues Control Panel Contact us Remote Control Remote control usage Use Your TV Switch TV on/off Watch connected devices Switch channels Adjust TV volume Date and time TV Operation Channel Settings...
BS 1362 and have the ASTA approval mark. result of the content in this document. Errors If the fuse is lost, contact your dealer in reported to Philips will be adapted and order to verify the correct type. published on the Philips support website as 3.
TV from the power outlet that results in accident, injury or damage. immediately. Contact Philips Consumer If you need to store the TV, disassemble the Care to have the TV checked before use.
Risk of overheating! Recycling Never install the TV in a confined space. Always leave a space of at least 4 inches or 10 cm around the TV for ventilation. Ensure curtains or other objects never cover the Your product is designed and manufactured with ventilation slots on the TV.
3 Your TV Environmental Protection Use Period Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at This logo labelled on the product itself indicates www.philips.com/welcome. that the Environmental Protection Use Period thereof is 10 years.
FORMAT Remote Control Adjust the picture display format. Menu Turn on/off the menu. EXIT Press this button to exit menu. Middle Standby/Power on Switches the TV to standby if it is on. Powers on the TV if it is in standby. Shortcut keys in USB mode: Rewind, Start, Red and green key Pause, Stop, Fast Forward.
4 Use Your TV Bottom This section helps you perform basic TV operations. Switch TV on/off Volume +/- Increase/reduce the volume. Mute Mute or unmute the sound. 21. Numeric keys (0~9) Select a channel or value. 22. SUBTITLE Display subtitle message, when current channel has subtitle option.
Watch connected devices Adjust TV volume Note Switch on the device before selecting it as an external signal source. Use the Source button To increase or decrease volume Press volume +/- key on the remote control. To mute or unmute the sound ...
5 TV Operation / key to select the channel position, then press Green key to confirm. Favorite: After choosing a channel, press Channel Settings Yellow key on the remote control to set your favorite channel. Press Yellow key again Auto Tuning to cancel it.
in channel menu. Press / key to Time Setting select turn on or off. key, and select Settings, then press OK Press PVR: Press OK key to enter PVR submenu, key to enter. Press / key to select Time and and press /...
Restore Default: Press OK key to enter Restore Default. ALL setup and Note channels will be reset. This function need to be connected with USB device, the USB of FAT32 format must be used. The USB of NTFS format does not support recording.
(play) key to play normally. USB Media Function Please insert a USB device into the USB Note interface of the TV, press SOURCES key to Press OPTIONS key on remote control display the source menu. Press / key to to show option menu of the Video, you select USB, and press OK key to enter USB can adjust these items by your desire.
720p - 50Hz, 60Hz Supported TV mounts 1080i - 50Hz, 60Hz To mount the TV, please purchase a Philips TV 1080p - 50Hz, 60Hz mount or any TV mount compliant with the VESA standard. To prevent damage to cables...
7 Troubleshooting Picture issues The TV is on, but there is no picture: This section covers common problems and their Check that the antenna is properly accompanying solutions. connected to the TV. Check that the correct device is selected as General issues the TV source.
Check that all cables are properly If the problem remains unresolved, please connected. contact your local Philips Customer Service Check that the volume is not set to 0. Centre. Check that the sound is not muted.