Layout And Items Supplied; Proper Use - EINHELL TC-SY 400 P Original Operating Instructions

local council where the nearest collection
point is.
•
When you are working with the paint spray
gun indoors or outdoors, the gun must not
suck in any solvent fumes.
•
When you are working outdoors, pay atten-
tion to the wind direction. The wind can dis-
tribute the material over long distances and
cause damage.
•
Do not allow children to handle the gun.
•
Never open the gun to carry out electrical
repairs.
•
Spraying into the skin can introduce toxins
into the body. Call a doctor immediately if the
jet causes a skin injury or penetrates the skin.
•
Children are not allowed to use this equip-
ment. Children should be supervised so that
they do not play with the equipment. Children
are not allowed to carry out cleaning or main-
tenance.
•
This equipment must not be used by persons
with reduced physical, sensory or mental
capacities or those with a lack of experience
and knowledge.

2. Layout and items supplied

2.1 Layout (Fig. 1-4, 13)
1 Air cap retaining ring
2 Air cap
3 Nozzle
4 Locking lever
5 Trigger
6 Max. paint volume control
7 Pistol mounting
8 Viscosity cup
9 Wall storage hook
10 Material tube connection
11 Material tube
12 Container
13 Fluid needle (plastic)
14 Trigger unit
15 Drive unit
16 Filter cap
A Cleaning needle
B Adapter for fl uid needle
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
Anl_SA_TC_SY_400_P_SPK8.indb 19 Anl_SA_TC_SY_400_P_SPK8.indb 19
GB
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Container
•
Cleaning brush (not shown)
•
Cleaning needle
•
Viscosity cup
•
Cap
•
2.5 mm nozzle, mounted on the pistol
(colour: black)
•
Replacement nozzle, 2 mm (red)
•
Original operating instructions

3. Proper use

The machine is suitable for spraying solvent-bor-
ne and water-borne paint, varnish, primers, trans-
parent lacquer, vehicle basecoats and clearcoats,
stains and wood preservatives. Alkali and acidic
substances, spray materials containing particles,
latex paint and non-drip/non-splatter paint must
not be sprayed.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
- 19 -
14.12.2016 11:35:58 14.12.2016 11:35:58