VocoPro KJ-7808RV Owner's Manual page 22

Operations
Graphic Equalizer
Fine tuning music for precise room tuning
To fine tune the sound of your musical output, we included the 5-Band Graphic EQ. This EQ
makes adjusting the warmth or sharpness of your music a breeze. Frequency range settings
are: 60, 250, 1k, 4k and 12k. The lows are 60 and 250, the mid is 1k and the highs are 4k and
12k. Below we have provided some common general settings.
(Recording) (Playing)
Clean Vocals Room Acoustic Slight Power Boost Reducing Tape Hiss
Correction
Channel Cueing
Channel cueing monitors the input signal(s) from the mix board to the headphones. When
channel cueing, you can select as many channels as you like to cue to headphones. To CHANNEL
CUE, first make sure the MASTER/CUE SELECTOR button is set to CUE. Then press the CUE
button on each channel that you want cued to the headphones. To REMOVE a channel from
being cued, simply depress that channels CUE button. To INCREASE or DECREASE the volume
level to headphones, use the CUE LEVEL control located next to the Cue/Master button. Note:
It is recommended to only cue necessary channels, as too many cued channels can be difficult
to discern from one another. Also when channel cueing, any Digital Key changes in effect will
not be audible to the headphones.
INCREASE DECREASE
OFF ON
20