Am/Fm Tuner Operations - VocoPro GIG-STAR User Manual

AM/FM Tuner Operations

See the AM/FM Tuner Controls and Functions section of this manual for
locating the buttons.
Turning on the Radio
1. Make sure that the GIG STAR's power is on.
2. Either use the TUNER button on the remote or the INPUT SELECT button on the front panel to turn on the radio.
Make sure the LED light next to TUNER is lit. This means the radio is on.
NOTE: When the radio is on, the GIG STAR is unable to play CDs.
Switching Between AM/FM
Use the AM/FM button to switch between the AM and FM frequencies.
Selecting Radio Stations
Before choosing a station, be sure that the proper frequency (AM or FM) is selected. Use the SEARCH arrows
(< and >) to search through radio stations. The back arrow or < (also the B-SCAN) button, searches backwards and
the forward arrow or > (also the F-SCAN) button searches forwards.
Example:
If you want to listen to 106.7 FM, you would press the AM/FM button until FM shows on the Graphic Display Panel.
Then you would press the search button until 106.7 was shown on the Graphic Display Panel.
Using the Auto Search Function
The Auto Search function rapidly scans through all radio stations and stops whenever there is a station with a strong
and clear signal. To begin auto search, simply press the AUTO button on the GIG STAR or on the remote.
POWERED STAGE
MONITORS
AUDIENCE
TV
To Video In
Speakers
1 2 3 4 5 6 7 8
PRESETS
CH +
VOL +
CH - VOL - TV/AV
STAGE
TV
To Video In
*Set to EXT for
External Speaker
Output
INT EXT
Speacker Selector
1 1
9 10 1 2 3 4 5 6 7
+10
PRESETS
MENU
POWER
7
Recording Device
SPEAKER 8
R L
1 5 101.1 5
8 9 10 1 2 3 4 5 6 7
+10
PRESETS
8 9 10
+10