Table of Contents
Advertisement
Quick Links
Electronic Disc Grinder
Model G 13VA
Handling instructions
Note:
Before using this Electric Power Tool, carefully read through these
HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is
recommended that these INSTRUCTIONS be kept readily available as an
important reference when using this power tool.
Advertisement
Table of Contents
Related Manuals for HIKOKI G 13VA
Summary of Contents for HIKOKI G 13VA
- Page 1 Electronic Disc Grinder Model G 13VA Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this power tool.
-
Page 2: General Power Tool Safety Warnings
English b) Use personal protective equipment. Always GENERAL POWER TOOL SAFETY WARNINGS wear eye protection. Protective equipment such as dust mask, non-skid WARNING safety shoes, hard hat, or hearing protection used Read all safety warnings and all instructions. for appropriate conditions will reduce personal Failure to follow the warnings and instructions may result in injuries. -
Page 3: Safety Warnings Common For Grinding Or Abrasive Cutting-Off Operations
English g) Use the power tool, accessories and tool bits h) Wear personal protective equipment. Depending on etc. in accordance with these instructions, application, use face shield, safety goggles or safety taking into account the working conditions and glasses. As appropriate, wear dust mask, hearing the work to be performed. -
Page 4: Safety Warnings Specific For Grinding And Abrasive Cutting-Off Operations
English a) Maintain a fi rm grip on the power tool and position your b) Do not position your body in line with and behind body and arm to allow you to resist kickback forces. the rotating wheel. Always use auxiliary handle, if provided, for maximum When the wheel, at the point of operation, is moving control over kickback or torque reaction during start-up. -
Page 5: Specifications
English – Do not use separate reducing bushings or adapters to – Ensure that ventilation openings are kept clear when adapt large hole abrasive wheels; working in dusty conditions, if it should become – For tools intended to be fi tted with threaded hole wheel, necessary to clear dust, fi... - Page 6 English 4. Fitting and adjusting the wheel guard 7. Confi rm the push button. The wheel guard is a protective device to prevent injury Confi rm that the push button is disengaged by pushing should the depressed center wheel be shattered during push button two or three times before switching the operation.
-
Page 7: Practical Grinder Application
English ○ Always use eye and ear protection. PRACTICAL GRINDER APPLICATION Other personal protective equipment such as dust mask, gloves, helmet and apron should be worn when 1. Pressure necessary. Do not apply the grinding wheel strongly to the grinding If in doubt, wear the protective equipment. -
Page 8: Maintenance And Inspection
English Wrench Wheel nut Washer nut Radial grinding Diamond wheel Depressed wheel center wheel Sanding disc Rubber pad Wheel washer Wheel guard Spindle Push button Fig. 5 4. Replacing carbon brushes (Fig. 7) MAINTENANCE AND INSPECTION <Disassembly> (1) Loosen the D4 tapping screw retaining the tail cover 1. - Page 9 7. Service parts list CAUTION Repair, modifi cation and inspection of HiKOKI Power Tools must be carried out by an HiKOKI Authorized Service Center. This Parts List will be helpful if presented with the tool to the HiKOKI Authorized Service Center when requesting repair or other maintenance.
- Page 12 Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan Code No. C99179315 M Printed in Malaysia...
Need help?
Do you have a question about the G 13VA and is the answer not in the manual?
Questions and answers