Replacing The Front Panel Power Reference Cable Assembly - HP E4418A Service Manual

Replacing the Front Panel Power Reference Cable Assembly

1. Remove the front panel from the power meter. (Refer to "Removing
the A3 Front Panel Assembly", on page 5-14 for details on
removing the front panel.)
2. Replace the power reference output cable assembly using the
replacement kit and the torques indicated on the following
diagrams.
9 lb/in
HP EPM-441A/442A Service Guide
Assembly and Disassembly Guidelines
6 lb/in
Replaceable Parts
Fold up tab
after assembly
25 lb/in
5-17