Using Vessel Lock; Garmin Virb Action Cameras; Connecting A Virb 360 Action Camera - Garmin GPSMAP 9 3 Series Owner's Manual

Using Vessel Lock

Your tracking-capable camera can lock on a target using information provided by other devices connected to
the chartplotter. Depending on the target you want to track, using Vessel Lock requires specific equipment
(Camera Tracking, page 169).
1 If necessary, from a video screen, select Options > Source, and select a compatible camera.
2 Select Options > Target Tracking and select an option:
• To track a vessel using AIS position information, select AIS List.
• To track a vessel or target using MARPA information, select MARPA List.
• To track a specific GPS coordinate location, select Waypoints
3 Select a target from the list, and select Review.
4 Verify the target details, and select Track with Camera.
5 Select Back until you return to the video screen.
The camera view automatically adjusts to show the selected vessel or target as either vessel moves.
6 If necessary, drag the screen to adjust the camera angle.
The Vessel Lock continues to track the vessel or target using the adjusted camera angle.
7 To stop tracking, select Options > Target Tracking > Stop Tracking > Back.
Garmin VIRB Action Cameras
®
Do not view video or photos while operating the vessel. Failure to pay attention to the conditions on the water
can result in vessel damage, personal injury, or death.
In some jurisdictions it could be considered an invasion of privacy rights to take or publicly display photographs
or videos of people without their permission. It is your responsibility to know and comply with privacy laws and
rights within the applicable jurisdiction(s).
NOTE: Garmin VIRB Action Cameras are discontinued. Go to
cameras.
Most VIRB action cameras connect to the chartplotter from the camera menu
Camera, page 171).
The VIRB 360 camera connects using WPS
In this manual, the term "VIRB action camera" refers to all models, except in the instructions on how to connect.
In that case, as listed above, the term "VIRB 360 camera" refers to only the 360 model.

Connecting a VIRB 360 Action Camera

You can connect a VIRB 360 action camera to the chartplotter using WPS. If you are connecting a VIRB camera,
connect through the camera settings
1 Set up the chartplotter's Wi‑Fi network
2 Bring the camera near the chartplotter.
3 On the VIRB 360 camera main menu, select Wireless > Wi-Fi.
4 If necessary, select the Wi-Fi toggle switch to enable the Wi‑Fi technology.
5 Press to select WPS, and press OK.
6 On the chartplotter, select Vessel > VIRB® >
The camera searches for the Wi‑Fi network and connects.
You can control the camera using the chartplotter.
170
WARNING
NOTICE
support.garmin.com
(Connecting a VIRB 360 Action Camera,
(Connecting a VIRB Action Camera,
(Setting Up the Wi‑Fi Network,
.
for support for existing
(Connecting a VIRB Action
page 170).
page 171).
page 26).
Viewing Video