Mercury Active Trim Overlay; Dometic® Optimus® Features; Activating The Optimus Overlay Bar - Garmin GPSMAP 9 3 Series Owner's Manual

Mercury Active Trim Overlay

When enabled, you can manually adjust the trim.
When enabled, you can change between Mercury active trim preset profiles.
Active trim system status.
Enable or Disable Select to turn the active trim system on or off.
Dometic Optimus
® ®
When connected to a compatible Optimus system, the chartplotter allows you to access and control the
system. You can enable the Optimus overlay to control the Optimus system
page 146).
When necessary, the Optimus system provides messages with information, instructions, and alerts about faults
and hazards.
A no swimming icon
modes, propeller control is automatic and could injure someone in the water.

Activating the Optimus Overlay Bar

1 From a chart, select Options > Edit Overlays.
2 Select Top Bar or Bottom Bar.
3 Select Optimus Bar.
146
Features
indicates that you should not swim when certain Optimus modes are active. In these
(Activating the Optimus Overlay Bar,
Controlling Third-Party Equipment Installed on Your Boat