Setting The Bow Offset; Digital Selective Calling; Networked Chartplotter And Vhf Radio Functionality; Turning On Dsc - Garmin GPSMAP 9 3 Series Owner's Manual

Setting the Bow Offset

Based on the installation angle, the trolling motor may not align with the center line of your boat. For the best
results, you should set the bow offset.
1 Adjust the angle of the trolling motor
forward.
2 From the trolling motor bar, select

Networked Chartplotter and VHF Radio Functionality

When you connect a compatible VHF radio to your chartplotter, these features are enabled.
• The chartplotter can transfer your GPS position to your radio. If your radio is capable, GPS position
information is transmitted with DSC calls.
• The chartplotter can receive digital selective calling (DSC) distress and position information from the radio.
• The chartplotter can track the positions of vessels sending position reports.
If you have a Garmin NMEA 2000 VHF radio connected to your chartplotter, these features are also enabled.
• The chartplotter allows you to quickly set up and send individual routine call details to your Garmin VHF
radio.
• When you initiate a man-overboard distress call from your radio, the chartplotter shows the man-overboard
screen and prompts you to navigate to the man-overboard point.
• When you initiate a man-overboard distress call from your chartplotter, the radio shows the Distress Call page
to initiate a man-overboard distress call.
• You can initiate other SOS calls on the chartplotter and send them using the radio.
For information about installing and connecting a VHF radio, see the VHF radio installation instructions.

Turning On DSC

Select > Other Vessels > DSC.

DSC List

The DSC list is a log of the most recent DSC calls and other DSC contacts you have entered. The DSC list can
contain up to 100 entries. The DSC list shows the most recent call from a boat. If a second call is received from
the same boat, it replaces the first call in the call list.
You can view the DSC list from the messages and warnings menu
120
so it aligns with the center line of your boat
> Calibrate > Bow Offset.

Digital Selective Calling

, pointing straight
(Messages and Warnings, page 150).
Digital Selective Calling