Step; Removing Protection Sheet; Setting The Dk Roll - Brother ™ QL-570 Set Up And Operation Manual

4 Removing Protection Sheet

Press the ON/OFF button ( ) to turn on the
Brother QL-570/580N on. Then, press the FEED
button for more than one second to remove the
protection sheet.

5 Setting the DK Roll

1
Press and hold the ON/OFF button to turn
the QL-570/580N off. Hold the DK Roll
compartment cover at the front of the Brother
QL-570/580N and firmly lift up to open the
cover.
2
Put the spool into the spool guides in the DK
Roll compartment.
Make sure that the spool arms are inserted firmly in
the spool guides on the left and right.
Insert the spool with the DK Roll located on the right
hand side of the Brother QL-570/580N.
Protection sheet
9

STEP

1
STEP
2
STEP
3
STEP
4