Table of Contents
Advertisement
5. Install the microprocessor:
6. Close the microprocessor-locking lever to secure the microprocessor.
22
IBM Eserver 325 Type 8835: Installation Guide
a. Touch the static-protective package containing the new microprocessor to
any unpainted metal surface on the server; then, remove the microprocessor
from the package.
b. Position the microprocessor over the microprocessor socket as shown in the
following illustration. Carefully press the microprocessor into the socket.
Attention:
To avoid bending the pins on the microprocessor, do not use
excessive force when pressing it into the socket.
Microprocessor
Microprocessor-
locking lever
Microprocessor
socket
Microprocessor
orientation indicator
Advertisement
Table of Contents
