Emergency Release; Transportation, Storage And Disposal; Removing The Appliance; Inserting The Transit Bolts - Bosch WNC254A0ES User Manual And Installation Instructions

19.1 Emergency release
Releasing the door
Requirement: The drain pump is
empty. → Page 43
ATTENTION! Escaping water may
1.
cause material damage.
Do not open the door if you can
▶
see water through the glass.
Pull the emergency release down-
wards with a tool and release.
a The door lock is released.
Insert the maintenance flap and
2.
lock it into place.
Close the maintenance flap.
3.

Transportation, storage and disposal

20 Transportation, stor-
age and disposal
Transportation, storage and disposal
20.1 Removing the appliance
Turn off the tap.
1.
Empty the water inlet hose.
2.
Put the appliance into standby
3.
mode.
→ "Put the appliance into standby
mode", Page 34
Unplug the appliance's mains plug.
4.
Drain the water.
5.
→ "Cleaning the drain pump",
Page 43
Detach the hoses.
6.
Transportation, storage and disposal en
Empty the dispensers.
7.
20.2 Inserting the transit
bolts
Secure the appliance before trans-
portation using transit bolts in order
to prevent transport damage.
Use a screwdriver to remove the 4
1.
cover caps.
Keep the cover caps.
Insert the 4 transit bolts.
2.
→ "Removing the transit bolts",
Page 13
20.3 Using the appliance
again
For further information, see
▶
→ "Installation and connection",
Page 12 and
→ "Starting an empty washing
cycle", Page 20.
59