Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WNA264U9IN
Summary of Contents for Bosch WNA264U9IN
- Page 1 Washer dryer WNA264U9IN [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 7 Display ........ 20 1.1 General information.... 4 8 Buttons ........ 23 1.2 Intended use....... 4 1.3 Restriction on user group... 4 9 Programmes ....... 25 1.4 Safe installation ...... 5 10 Accessories...... - Page 3 15 Basic settings...... 33 15.1 Overview of the basic set- tings........ 33 15.2 Changing the basic set- tings........ 34 16 Cleaning and servicing .... 34 16.1 Cleaning the drum.... 34 16.2 Cleaning the detergent drawer........ 34 16.3 Cleaning the drain pump.. 35 17 Troubleshooting....... 39 17.1 Emergency release .... 49 18 Transportation, storage and disposal ........
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... -
Page 6: Safe Use
en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶... - Page 7 Safety en ▶ If the appliance or the power cord is damaged, immediately un- plug the power cord or switch off the fuse in the fuse box and turn off the water tap. ▶ Call customer services. → Page 51 An ingress of moisture can cause an electric shock. ▶...
- Page 8 en Safety WARNING ‒ Risk of explosion! Highly flammable objects such as lighters or matches may ignite during the drying process. ▶ Remove all highly flammable objects from any pockets in your laundry before the drying process. Unwashed laundry that has come into contact with solvents, oil, wax, wax remover, paint, grease or stain remover may ignite when drying is in progress.
-
Page 9: Safe Cleaning And Maintenance
Safety en CAUTION ‒ Risk of scalding! When you wash at high temperatures, the detergent solution gets hot. ▶ Do not touch the hot detergent solution. CAUTION ‒ Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. -
Page 10: Preventing Material Damage
en Preventing material damage Make sure that the length of the ▶ 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be ATTENTION! able to operate properly. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the appli- mediately if they come into contact ance afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy... -
Page 12: Contents Of Package
en Installation and connection Remove any packaging and pro- ¡ Water inlet hose tective covers completely from the → "Connecting the water inlet appliance. hose", Page 14 → "Disposing of packaging", 4.3 Requirements for the in- Page 11 stallation location Check the appliance for visible damage. Open the door. -
Page 13: Removing The Transit Bolts
Installation and connection en Pull the hoses out of the holders. Installation loca- Requirements tion Wooden joist Place the appli- floor ance on a water- resistant wooden board (minimum thickness of 30 mm) which is screwed tightly to the floor. Kitchen unit Only install the appliance under- neath a continu-... -
Page 14: Connecting The Appliance
en Installation and connection Remove the 4 sleeves. 4.5 Connecting the appliance Connecting the water inlet hose Connect the water inlet hose. Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4"). Push the 4 cover caps downwards. Open the water tap carefully and check that the connection points are tight. -
Page 15: Aligning The Appliance
Installation and connection en Note: Observe the draining heights. To align the appliance, turn the ap- The draining heights are: minimum: pliance feet. Check that the appli- 60 cm, maximum: 100 cm ance is level using a spirit level. Siphon Secure the con- nection point with a (24–40 mm) hose clamp. - Page 16 en Installation and connection The connection details of the appli- ance can be found under Tech- nical data → Page 51. Check the mains plug is inserted properly.
-
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. 5.2 Detergent drawer Maintenance flap for the drain pump → Page 35 Note: Observe the manufacturer's in-... -
Page 18: Control Panel
en Familiarising yourself with your appliance Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 25 Programme selector → Page 30... -
Page 19: Before Using For The First Time
first time en Pour washing powder into com- first time 6 Before using for the partment II. first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry. - Page 20 en Display 7 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. "Ready in" time → "Buttons", Page 23 Recommended The maximum load capacity for the selec- load...
- Page 21 Display en Display Designation Description Rinse Programme status Spin Programme status End of pro- Programme status gramme Drying Programme status Anti-crease Programme status Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated.
- Page 22 en Display Display Designation Description Door ¡ Lights up: The door is locked and can- not be opened. ¡ Flashes: The door is not closed prop- erly. ¡ Off: The door is unlocked and can be opened. ¡ No water pressure. ¡...
-
Page 23: Buttons
Buttons en 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection Description Temp.℃ - 90 Adjust the temperature. Set temperature in °C. Spin Speed - 1400 Adjust the spin speed or deactivate the spin cycle. Set spin speed in rpm. - Page 24 en Buttons Button Selection Description Anti Stain Multiple selection Select the type of stain. The temperature, drum movement and soaking time are all adjusted to suit the type of stain. Wash+Dry ¡ When is selected, only washing ¡...
-
Page 25: Programmes
Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. Max. load load (kg) (kg) Wash Dry- Cottons Wash hard-wearing items made from cotton, 10.5 linen or blended fabrics. Also suitable as a short programme for nor- mally soiled laundry when you activate ... - Page 26 en Programmes Programme Description Max. Max. load load (kg) (kg) Wash Dry- Delicates/ Wash delicate, washable items made from – Silk silk, viscose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag.
- Page 27 Programmes en Programme Description Max. Max. load load (kg) (kg) Wash Dry- Anti Bac- Wash hard-wearing items made from cotton, teria linen or blended fabrics. Suitable for allergy sufferers and for strict hy- giene requirements. Note: Once the set temperature has been reached, it remains constant throughout the entire washing process.
- Page 28 en Programmes Programme Description Max. Max. load load (kg) (kg) Wash Dry- Programme setting: ¡ Max. 60 °C ¡ Max. 1000 rpm Drum Clean Clean and care for the drum. – – After cleaning, the residual water in the drum is removed by supplying hot air.
-
Page 29: Accessories
Accessories en 10 Accessories Use original accessories. These have been made especially for your appliance. Order number Water inlet hose exten- Extend the water inlet WMZ2381 sion hose for cold water or AquaStop (approx. 2.50 Fixing brackets Improves the stability of WMZ2200 the appliance. -
Page 30: Detergents And Care Products
en operation Open the door. operation 13 Basic operation Place the laundry in the drum. Close the door. operation Ensure that there is no laundry 13.1 Switching on the appli- trapped in the door. ance Requirement: The appliance has 13.5 Adding detergent and been correctly installed and connec- care product ted. -
Page 31: Soaking Laundry
operation en – If the water level is high, start 13.7 Soaking laundry the Spin programme or se- Note: No additional detergent is re- lect a suitable programme for quired. The washing solution is then draining. used for washing. → "Programmes", Page 25 Remove the laundry. Start the programme. -
Page 32: Childproof Lock
en Childproof lock 14 Childproof lock Secure your appliance against being operated unintentionally using the controls. 14.1 Activating the childproof lock Press and hold the two Hygiene ▶ Care and Ready In buttons for approx. 3 seconds. a The display shows a The control elements are locked. -
Page 33: Basic Settings
Basic settings en 15 Basic settings You can configure the basic settings for your appliance to meet your needs. 15.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 34: Changing The Basic Set- Tings
To keep your appliance working effi- ciently for a long time, it is important to clean and maintain it carefully. Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.bosch-home.in. -
Page 35: Cleaning The Drain Pump
Cleaning and servicing en Pull out the insert upwards. Clean the opening for the deter- gent drawer. Clean the detergent drawer and in- sert with water and a brush, and Push in the detergent drawer. then dry them. 16.3 Cleaning the drain pump Clean the drain pump in the event of faults, e.g. - Page 36 en Cleaning and servicing Slide a sufficiently large container CAUTION - Risk of scalding! under the opening. When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
- Page 37 Cleaning and servicing en Insert the pump cap. Cleaning the drain pump Requirement: The drain pump is empty. → Page 35 Since water may remain in the drain pump, unscrew the pump cap carefully. Screw the pump cap as far as it will go. Clean the interior, the thread on 90°...
- Page 38 en Cleaning and servicing Insert the mains plug. Before the next wash Switch on the appliance. To prevent unused detergent from Pour 1 litre of water into compart- flowing straight into the outlet in the ment II. next wash, run a suitable programme for draining after you have emptied Select a suitable programme for the drain pump.
-
Page 39: Troubleshooting
Troubleshooting en 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 40 en Troubleshooting Fault Cause and troubleshooting "E:36 / -10" Ensure that the pump cap is screwed in all the way ▶ into the appliance. The handle on the pump cap must be in a vertical position. → "Cleaning the drain pump", Page 37 "H:32"...
- Page 41 Troubleshooting en Fault Cause and troubleshooting Drum cleaning is required. → "Cleaning the drum", Page 34 ▶ "H:95" lights up altern- The water pressure is low. ately with End. ▶ → " ", Page 40 All other error codes. Malfunction Call the after-sales service. ▶ → "Customer Service", Page 51 The drying time is too The ambient temperature is greater than 30 °C.
- Page 42 en Troubleshooting Fault Cause and troubleshooting The programme does → "Deactivating the childproof lock", Page 32 ▶ not start. Ready In is activated. Check whether Ready In is activated. ▶ → "Buttons", Page 23 Laundry is caught in the door. Open the door again. Remove any trapped laundry.
- Page 43 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Remove any unapproved extensions from the water ▶ ing. hose. → "Connecting the appliance", Page 14 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 44 en Troubleshooting Fault Cause and troubleshooting Heavy foam build-up Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
- Page 45 Troubleshooting en Fault Cause and troubleshooting The spin result is not A low spin speed is selected. satisfactory. The laun- The next time you run a wash cycle, set a higher ▶ dry is too wet/too spin speed. damp. Start the Spin programme. ▶...
- Page 46 en Troubleshooting Fault Cause and troubleshooting The programme dura- The unbalanced load detection system eliminates an tion changes during imbalance by repeatedly redistributing the laundry. the wash cycle. Not a fault – no action required. ▶ Note: When loading, where possible, place large and small items of laundry together in the drum.
- Page 47 Troubleshooting en Fault Cause and troubleshooting The laundry is too Make sure that the water tap also remains open ▶ damp. during the drying phase. The ambient temperature is greater than 30 °C. Ensure that the ambient temperature is lower than ▶...
- Page 48 en Troubleshooting Fault Cause and troubleshooting Water inlet noise dur- Drying phase requires water. ing the drying phase. Not a fault. Make sure that the water tap also remains open during the drying phase. Odours have formed Humidity and detergent residue may promote the in the appliance.
-
Page 49: Emergency Release
Transportation, storage and disposal en 17.1 Emergency release 18.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 35 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 50: Disposing Of Old Appliance
¡ Please visit our web- at risk. site https:// Do not install the appliance behind www.bosch-home.in/ ▶ a door as this may obstruct the ap- metapages/e-waste- pliance door or prevent it from management to find opening. -
Page 51: Customer Service
Appliance depth 107.2 cm Helpline no.: 1800-266-1880 with door open (Monday to Saturday – 8 am to Weight 81.3 kg 8 pm) Maximum load 10.5 kg Email ID: service.in@bosch- home.com Mains voltage 220-240 V, Chat with us (WhatsApp): 50 Hz +91-8451000555 Minimum in- stallation protec- tion Nominal power 1900-2300 W... - Page 52 en Technical data Length of the wa- 150 cm Length of the 160 cm ter inlet hose power cord Length of the wa- 150 cm ter outlet hose...
- Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.