Table of Contents
Advertisement
en Troubleshooting
Fault
Brief whirring noise
after switching on the
appliance.
Spin noise during the
drying phase.
Rushing, hissing
noise.
Water inlet noise dur-
ing the drying phase.
Odours have formed
in the appliance.
58
Cause and troubleshooting
Intelligent dosing system carries out a function test.
Not a fault – normal operating noise.
▶
Thermal spinning is active.
Water is flushed under pressure into the detergent
drawer.
Not a fault – normal operating noise.
▶
Drying phase requires water.
Not a fault.
1.
Make sure that the water tap also remains open
2.
during the drying phase.
Humidity and detergent residue may promote the
formation of bacteria.
→ "Cleaning the drum", Page 41
▶
If you are not using the appliance, leave the door
▶
and detergent drawer open so that residual water
can evaporate.
Advertisement
Table of Contents
