Table of Contents
Advertisement
en Installation and connection
Unscrew
and remove
2.
the screws for the 4 transit bolts
using a WAF 13 wrench.
Remove the power cable from the
3.
holder.
Remove the 4 sleeves.
4.
14
all of
Put on the 4 cover caps.
5.
Push the 4 cover caps downwards.
6.
Note: To install the transit bolts to
transport the appliance, perform
these steps again in the reverse or-
der.
4.5 Connecting the appliance
Connecting the water inlet hose
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
Do not immerse the electrical
▶
AquaStop valve in water.
WARNING
Advertisement
Table of Contents
