Buttons - Bosch WNC254A0ES User Manual And Installation Instructions

en Buttons

Buttons

8 Buttons
The selection of programme settings depends on the programme that is set.
Buttons
Button
(mains
switch)
⁠
⁠
⁠ Termin.
Más
⁠ Speed Per-
fect
⁠ Prelav.
24
Selection
¡ Switch on
¡ Standby mode
Multiple selection
- 90
- 1400
¡ Start
¡ Cancel
¡ Pause
Up to 24 hours
Multiple selection
¡ Activate
¡ Deactivate
¡ Activate
¡ Deactivate
Description
Switch on the appliance or put it in
standby mode.
To change a setting, press the
selection button until the display
shows the required setting.
Adjust the temperature.
Set temperature in °C.
Adjust the spin speed or deactivate
the spin cycle.
Set spin speed in rpm.
If is selected, the water is drained
and the spin cycle is deactivated. The
laundry stays wet inside the drum.
Start, cancel or pause the pro-
gramme.
Set the programme end time.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
→ "Basic settings", Page 40
Activate or deactivate a shorter pro-
gramme duration.
Note: Energy consumption increases.
The washing result is not affected by
this.
Activate or deactivate prewash, e.g.
for washing heavily soiled laundry.
Note: If the intelligent dosing system
is activated, the detergent will be dis-
pensed automatically for the prewash
and the main wash.
If the intelligent dosing system is de-
activated, place the detergent for the
prewash directly in the drum.
or