Vizualogic Quantum Owner's Manual page 10

OSD Function Control
OSD MAIN MENU – With the remote press the PICTURE SELECT button to
enter OSD main menu, then select Item in the menu by continuously hitting
PICTURE SELECT button. Use the up and down buttons to change the value.
BRIGHTNESS – Adjust BRIGHTNESS value from 0–100 (default:50).
CONTRAST – Adjust CONTRAST value from 0–100 (default:50).
COLOR – Adjust COLOR value from 0–100 (default:50).
TINT – Adjust TINT value from 0–100 (default:50).
RESET – Resets all OSD adjustment values to default.
ThinDVD Basics
To get the maximum use out of your ThinDVD player, make sure to review this
section completely.
REGIONAL CODING
Both the DVD player and disc are coded by region. These regional codes must
match in order for the disc to play. The ThinDVD player has region 1
coding. DVD's with other regional codes cannot be played in this unit.
TYPES OF DISCS THE ThinDVD PLAYER WILL PLAY:
• DVD-Video: DVD contains video.
• CD-Video: CD contains movie only.
• CD-R/RW: A disc that contains audio files (for example, a CD-R with
downloaded MP3 Files), MPEG, or JPEG files.
10
TYPES OF DISCS THE ThinDVD PLAYER WILL NOT PLAY:
• Optical disc
• ECD-1, CD-ROM, DVD-ROM
• Mini disc
• ECDG (audio only, not graphics).
LOADING AND PLAYING A DISC
Press the POWER button on either the front of the player or the remote to turn
the unit on. Insert the disc into the loading slot (with the label side facing
towards the roof of the vehicle) until the DVD player fully loads the disc.
Playing Audio CDs
When playing an audio CD, the DISPLAY banner appears automatically. It
displays the current track and the amount of the time for that track playing, the
total amount of time on the disc and the current time running on the disc. Press
the DISPLAY button on the remote to display the DISPLAY banner. The options
below show you what happens when you press the DISPLAY button.
Press DISPLAY (1x) – "Single Elapsed" appears along with the current track
number playing and the time of that track .
Press DISPLAY (2x) – "Total Elapsed" appears along with the current track
number playing and the total time playing on CD.
Press DISPLAY (3x) – "Total Remain" appears along with the current track
number playing and the amount of time remaining on
the entire CD.
Press DISPLAY (4x) – "Single Remain" appears along with the current track
number playing and the amount of time remaining.
11