Download Print this page

PEERLESS VML11 Installation And Assembly

Under cabinet swivel mount for lcd tvs

Advertisement

Quick Links

Installation & Assembly -
This product is intended for use with 10" to 15" LCD TVs weighing up to 10 lb and VESA® 75 and VESA® 100
mounting patterns
IMPORTANT!
Read entire instruction sheet before you start assembly and installation.
Important, read before installation:
the cabinet, the cabinet depth should be at least 1.5" more than the height of the TV. This
depth may be more depending on the width and shape of your TV. As an alternative
means of mounting, the mount can still be fastened when it is extended 2" past the front
of the mounting surface which will add 2" of depth to your cabinet.
PART LIST
Part #
QTY.
A 090-0147
1
B 095-4101
1
C 520-2027
4
D 520-2099
4
E 540-9443
4
F 520-2100
4
G 540-9465
4
H 560-1134
3
I 540-9442
8
J 590-1122
1
K 520-2005
4
L 540-9447
4
M 504-2013
4
N 590-5003
4
O 504-2014
4
Some parts may not appear exactly as illustrated.
A
G
Visit the Peerless Web Site at www.peerlessindustries.com
Under Cabinet Swivel Mount for LCD TVs
In order to locate the mount completely under
DESCRIPTION
LCD assembly
adapter plate
M4 x .7 x 10 mm phillips screw
10-32 x 1.25" phillips screw
.219 x .5 x .25 nylon spacer
10-32 x 2" phillips screw
.219 x .5 x .88 nylon spacer
cord clip
#10 SAE washer
2' helical wire wrap
M5 x .8 x 10 mm phillips
1/4 split washer
M4 x 12 mm phillips screw
.198 x .313 x .437 retaining spacer
M4 x 20 mm phillips screw
F
I
B
H
K
L
1 of 4
ISSUED: 08-11-03 SHEET #: 090-9093-3 11-10-04
For customer service call 1-800-729-0307 or 708-865-8870.
Models: RTLCD-100S
Max Load 10 lb (4.5 kg)
C
M
E
J
N
D-LCD-100S
D
O

Advertisement

loading

Summary of Contents for PEERLESS VML11

  • Page 1 TV. As an alternative means of mounting, the mount can still be fastened when it is extended 2" past the front of the mounting surface which will add 2" of depth to your cabinet.
  • Page 2 Remove cord cover from LCD assembly (A). This product is designed to accommodate screens with VESA pattern. For safe mounting, please make sure that mounting screws turn at least three complete turns in the screen inserts. FOR VESA 75 MOUNTING PATTERN: 1.) Choose hole pattern indicated below.
  • Page 3 Carefully hold the closed mount with the TV against the bottom of your cabinet. Make sure that there is enough clearance between the back of the TV and the wall to clear the back tab.
  • Page 4 LCD assembly (A). Place cord cover back onto LCD assembly (A), so that it is even with the bends on the side of the mount. Note: Make sure all slack is pulled out with mount fully open before replacing cord cover.

This manual is also suitable for:

Rtlcd-100sD-lcd-100s