Table of Contents
Advertisement
Quick Links
05/10/2013
Ins-30208-US Net2 Entry - Vandal Resistant Panel
Technical Support
1.800.672.7298
Technical help is available:
Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/
Description of product
The Net2 Entry panel is a robust door entry panel incorporating both door entry and access control functions. It is
powered using power over Ethernet (PoE) and communicates with the other elements of the system using IPv6,
providing 'plug and play' installation. Each panel is associated with a Net2 Entry control unit which is the interface to
the door hardware.
The panel is equipped with a keypad and a proximity token reader. A resident can use either the keypad or a token to
gain entry. Installers gain access to the menu options using an engineer code or an engineer token.
Net2 software is used to administer the access control functions. It must be v4.25 or a later version.
6
5
4
3
supportUS@paxton-access.com
Monday - Friday from 02:00 AM - 8:00 PM (EST)
7
8
1
2
1. Speaker
2. Proximity reader
3. Keypad
4. LCD display
5. IR LEDS for night time operation
6. Microphone
7. Color camera
8. Light sensor
Paxton
Page 1
Advertisement
Table of Contents
Related Manuals for Paxton Ins-30208-US
Summary of Contents for Paxton Ins-30208-US
- Page 1 Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST) Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/ Description of product The Net2 Entry panel is a robust door entry panel incorporating both door entry and access control functions. It is powered using power over Ethernet (PoE) and communicates with the other elements of the system using IPv6, providing 'plug and play' installation.
-
Page 2: Installation
Paxton recommend that the network cable is run to each location and terminated in a network box. A patch cable should then be used to link the unit to the network. This makes unit replacement or removal for building maintenance much easier. - Page 3 SURFACE MOUNT FLUSH MOUNT Page 3...
- Page 4 Use the up and down arrows on the panel to view all the menu options. Use the key to Cancel Initializing a new system The first time the system is powered up the panel will request that the Language to be used is confirmed. It then asks for an Engineer code to be set up.
-
Page 5: Door Open Time
Use the up and down arrows on the panel to view all the menu options. Use the key to Cancel 1. Door open time from the Engineer menu - Press key 1. This is the time period that the lock will stay released once the open door button has been pressed on a monitor. -
Page 6: Panel Settings
5. Panel settings from the Engineer menu - Press key 5 1. Set control unit from Panel settings menu - Press key 1 This sets the control unit that the Net2 Entry panel is associated with. Enter the Serial Number of the control unit and then press Bell. -
Page 7: Engineer Access
7. Engineer Access from the Engineer menu - Press key 7 1. Set Engineer Code from Engineer Access menu - Press key 1 This allows the Engineer to change the Engineer code 2. Change Engineer Token from Engineer Access menu - Press key 2 This allows the engineer to add / change the Engineer token The engineer can create a token that can be presented to the proximity reader instead of using the engineer code to gain access to the Engineer Menu. - Page 8 Features Camera system Full color I/R illumination Audio system Two way Display Backlit LCD Paxton Access tokens 125k/Hz Proximity reader Environment Operating temperature - 20 °C ( - 4 °F ) 50 °C ( 122 °F ) IP55 IP Rating...
Need help?
Do you have a question about the Ins-30208-US and is the answer not in the manual?
Questions and answers