Table of Contents
Advertisement
Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Block Services.
The Block Services page displays.
5. Specify when to block the services:
• Per Schedule: To block the services based on a schedule, select the Per Schedule
radio button. For information about how to set the schedule, see Schedule when
to block Internet sites and services on page 68.
• Always: To block the services all the time, select the Always radio button.
6. Click the Add button.
The Block Services Setup page displays.
7. To add a service that is in the Service Type list, select the application or service.
The settings for this service automatically display in the fields.
8. To add a service or application that is not the list, select User Defined.
a. If you know that the application uses either TCP or UDP, select the appropriate
protocol.
Otherwise, select TCP/UDP (both).
b. Enter the starting port and ending port numbers.
If the service uses a single port number, enter that number in both fields.
To find out which port numbers the service or application uses, you can contact
the publisher of the application, ask user groups or newsgroups, or search on
the Internet.
c. In the Service Type/User Defined field, enter a name for the service.
9. To specify how to filter the services, select one of the following radio buttons:
• Only This IP Address: Block services for a single device.
• IP Address Range: Block services for a range of devices with consecutive IP
addresses on your network.
• All lP Addresses: Block services for all devices on your network.
10. Click the Add button.
Control Access to the Internet
67
User Manual
Advertisement
Table of Contents
