Set Up Your Satellite With A Wired Connection To Your Router; Set Up And Sync An Orbi Pro Satellite Over A Wired Connection.20 - NETGEAR Orbi Pro SXK50 User Manual

Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
Note: The first time that you sync the satellite and the router, the sync process can
take up to five minutes because the router might automatically update the satellite's
firmware.
Set up your satellite with a wired connection
to your router
Instead of using a WiFi backhaul connection between the router and the satellite, you
can use a wired connection.
Set up and sync an Orbi Pro satellite over a wired
connection
In some situations, you might prefer to set up your Orbi Pro satellite with an Ethernet
cable directly connected to your Orbi Pro router.
If your business has built-in Ethernet outlets in the office rooms and the cables lead into
the same physical network, you can also connect both your Orbi Pro router and Orbi
Pro satellite to the Ethernet outlets and let them sync.
To set up and sync your Orbi Pro satellite over a wired connection:
1. Place your satellite in the room where you want WiFi service.
2. Connect an Ethernet cable to one of the LAN ports.
3. Connect the other end of the Ethernet cable to a LAN port on the router.
4. Connect the satellite to a power source.
The Power LED on the back of the satellite lights green.
The satellite bar LED pulses white. The satellite automatically syncs to the Orbi Pro
router.
Note: The first time that you sync the satellite and the router, the sync process can
take up to five minutes because the router might automatically update the satellite's
firmware.
After the sync process is complete, the satellite bar LED lights blue for about three
minutes and then turns off. Blue indicates that the router and satellite successfully
synced, and the wired connection between the router and satellite is good.
Overview and Setup 20 User Manual