Table of Contents
Advertisement
1736/Upgrade
The upgrade license activates the advanced analysis features of the
1738 on a 1736 Logger.
Features are:
•
Power Quality assessment according to EN 50160: "voltage
characteristics of electricity supplied by public distribution
networks."
This includes the PQ Health logging overview screen with
pass/fail indication of all supported PQ parameters and the
detailed harmonic limits validation in firmware and software.
•
RMS profile and wave shape recordings on voltage or current
events
IEEE 519/Report
The IEEE 519/Report license enables a validation of voltage and
current harmonics according to the standard IEEE519: "IEEE
recommended practice and requirements for harmonic control in
electric power systems."
License Activation
To activate a license from a PC:
1.
Go to www.fluke.com.
2.
Go to the product registration page and select your region,
country, and language.
3.
Select Brand > Fluke Industrial.
4.
Select Product Family > Power Quality Tools.
5.
Select Model Name > Fluke 1736 or Fluke 1738.
6.
Enter the serial number of the Logger.
You must enter the serial number correctly (no blank
characters allowed). The serial number is found in the Status
Information screen or on the back decal of the Logger. See
Status Information on page 48 for more information. Do not
use the serial number of the power supply module.
7.
Enter the license key from the license activation letter. The web
form supports up to two license keys. You can enable licensed
features at a later time by returning to the web registration page.
The activation of the WiFi Infrastructure does not require a
license key.
8.
Complete all the fields and submit the form.
An e-mail with the license file is sent to your e-mail address.
9.
Create a folder named "Fluke173x" on a USB flash drive. Do not
use spaces in the file name. Make sure the USB is formatted with
FAT or FAT32 file system. (In Windows, USB flash drives ≥32 GB
can be formatted with FAT/FAT32 only with 3rd party tools.)
10. Copy the license file (*.txt) to this folder.
11. Make sure the Logger is powered from mains and turned on.
12. Insert the flash drive into the Logger. The USB Transfer screen
pops up and offers the license activation.
13. Proceed with
. A message window informs you when the
activation is complete.
Power Logger
Licensed Features
Note
Note
51
Advertisement
Table of Contents
